Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Safety - Seats, seat belts and supplemental restraint system
- Seats
- Head restraints/headrests
- Seat belts
- Precautions on seat belt usage
- Precautions on seat belt usage
- Seat belt warning light and chime
- Three-point type seat belt with retractor
- Seat belt extenders
- Child safety
- Child restraints
- Basic information
- Lower Anchors and Tethers for CHildren (LATCH) system
- Rear-facing child restraint installation using LATCH
- Rear-facing child restraint installation using the seat belts
- Forward-facing child restraint installation using LATCH
- Installing top tether strap
- Forward-facing child restraint installation using the seat belts
- Installing top tether strap
- Booster seats
- Supplemental Restraint System (SRS)
- Precautions on SRS
- NISSAN Advanced Air Bag System (front seats)
- Other supplemental front-impact air bag precautions
- Driver and front passenger supplemental knee air bag
- Front, front central*, rear outboard seat-mounted side-impact supplemental air bag and roof-mounted curtain side-impact and rollover supplemental air bag systems
- Seat belts with pretensioners (front and rear outboard seats)
- Supplemental air bag warning labels
Other materials:
Basic Inspection. Anti-Pinch Inspection
Description
If any of the following operations are performed, the initialization
is necessary for normal operation of anti-pinch function. Refer to Work
Procedure.
When front power window motor (driver side) replaced.
Power supply to the front power window motor (driver side) is not cut ...
P0079 Evt Control Solenoid Valve
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0079
00
Exhaust valve control solenoid
(Exhaust Valve Control Solenoid Circuit Low Bank 1)
Diagnosis condition
Engine running at idle
Signal (terminal)
...
Garage mode system
The liftgate can be set to open to a specific
height by performing the following:
1. Open the liftgate.
2. Pull the liftgate down to the desired
position and hold the liftgate (the liftgate will have some resistance when
being manually adjusted).
3. While holding the liftgate in position,
press an ...