Nissan Rogue (T33) 2021-Present Service Manual: With Vdc :: Dtc/circuit Diagnosis

Change of System Mode
Description CAUTION: When the following operations are performed, always use CONSULT, for performing “SYSTEM MODE CHANGE” of “WORK SUPPORT”. Refer to Work Procedure. ×:...
C1040-63 Emergency Brake
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C1040 63 Emergency brake (Emergency brake) Diagnosis conditi...

Other materials:

How to Erase Permanent Dtc
Description OUTLINEWhen a DTC is stored in control moduleWhen a DTC is stored in control module and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw. *1: When the same mal ...

Intelligent Key Interlock Function (with Navigation System)
System Description SYSTEM DIAGRAMINPUT SIGNAL AND OUTPUT SIGNAL Component Function BCM Recognizes the following status and transmits it to driver seat control unit via CAN communication: Ignition ON signal Door lock status signal (with Intelligent Key, front door request switch op ...

Symptom Diagnosis. Door Does Not Lock/unlock with Door Lock/unlock Switch
All Door Description All doors do not lock/unlock using door lock/unlock switch. Diagnosis Procedure CHECK POWER SUPPLY AND GROUND CIRCUIT Check door lock and unlock power supply and ground circuit. Refer to Diagnosis Procedure (front door) and Diagnosis Procedure (rear door). Is the inspecti ...