Nissan Rogue (T33) 2021-Present Service Manual: Driver Controls :: Interior Lighting System
- Precaution. Precautions
- System Description. Component Parts. Interior Lamp Control System
- System Description. System
- System Description. Diagnosis System (bcm). Common Item
- Ecu Diagnosis Information. Bcm
- Basic Inspection. Diagnosis and Repair Work Flow
- Dtc/circuit Diagnosis. Interior Room Lamp Power Supply Circuit
- Dtc/circuit Diagnosis. Map Lamp Control Circuit
- Dtc/circuit Diagnosis. Room Lamp Control Circuit
- Dtc/circuit Diagnosis. Mood Lamp Control Circuit
- Dtc/circuit Diagnosis. Luggage Room Lamp Control Circuit
- Dtc/circuit Diagnosis. Vanity Mirror Lamp Control Circuit
- Dtc/circuit Diagnosis. Push-Button Ignition Switch Illumination Control Circuit
- Symptom Diagnosis. Interior Lighting System Symptoms
- Removal and Installation. Map Lamp
- Removal and Installation. Vanity Mirror Lamp
- Removal and Installation. Room Lamp
- Removal and Installation. Personal Lamp
- Removal and Installation. Mood Lamp (front Door)
- Removal and Installation. Mood Lamp (instrument Panel Center)
- Removal and Installation. Mood Lamp (center Console Tray)
- Removal and Installation. Mood Lamp (center Console)
- Service Data and Specifications (sds)
Other materials:
Vdc Off Indicator Lamp
Component Function Check
CHECK VDC OFF INDICATOR LAMP FUNCTION (1)
Check that VDC OFF indicator lamp in combination meter turns ON for approximately 1 second after ignition switch is ON.
CAUTION:
Never start engine.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Refer ...
Power Supply and Ground Circuit
Power Supply and Ground Circuit (hd Map Module)
Diagnosis Procedure
CHECK FUSE
Check if the following fuses are blown.
Power supply Fuse No.
Ignition
113
Battery
111
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair the par ...
P1575 Brake Switch
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content) DTC detecting condition
P1575
00
BRAKE SW
(BRAKE SW)
Diagnosis condition
—
Signal (terminal)
CAN communication signal
Threshold
Stop lamp switch signal is sent to ECM for ...
