Nissan Rogue (T33) 2021-Present Service Manual: Removal and Installation :: Mood Lamp (front Door)

Exploded View

For exploded view of front door finisher. Refer to Exploded View.

Replacement

MOOD LAMP (FRONT DOOR)

CAUTION:

  • Disconnect battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.

  • Replacement of a single part is not possible due to the adoption of LED. When replacement, replace front door finisher as a set. Refer to Removal and Installation.

    Removal and Installation. Personal Lamp
    Exploded View Headlining assembly Personal lamp assembly : Metal clip : Nissan Ariya Vehicle front Removal and Installation REMOVALCAUTION: Disconnect the battery negative termi...
    Removal and Installation. Mood Lamp (instrument Panel Center)
    Exploded View For exploded view of instrument panel. Refer to Exploded View. Removal & Installation REMOVALCAUTION: Disconnect the battery negative terminal or remove power ...

    Other materials:

    P11af Vcr Shaft 2 Rotation Angle Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P11AF 00 VCR shaft 2 rotation angle sensor (Variable compression ratio shaft 2 rotation angle sensor) Diagnosis condition — Signal (terminal) VCR con ...

    Dtc/circuit Diagnosis. B2ccf-04 Passenger Door Mirror Control Module
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B2CCF-04 Passenger door mirror control module (Passenger door mirror control module) Diagnosis condition Ignition switch is ON or OFF (auto ACC status). Signal ...

    Rear View Monitor. Dtc/circuit Diagnosis
    Power Supply and Ground Circuit Av Control Unit Diagnosis Procedure CHECK FUSE Turn ignition switch OFF. Check that the following fuse is not blown (open) Power source Fuse No. Capacity Battery #25 20 A Is the fuse blown (open)? YES>> Replace fuse after ...