Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Interior Lighting System Symptoms

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Interior Lighting System / Symptom Diagnosis :: Interior Lighting System Symptoms

Symptom Table

NOTE:

Perform self diagnosis result with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

Symptom Possible cause Inspection item

All the following lamps do not turn ON:

  • Map lamp assembly

  • Room lamp

  • Personal lamp

  • Luggage room lamp

  • Mood lamp

  • Vanity mirror lamp

  • Fuse

  • Interior room lamp relay power supply/ground/control circuit

  • Interior room lamp relay

  • Fuse block (J/B)

  • BCM

Interior room lamp power supply circuit

Refer to Diagnosis Procedure.

Any of the following lamp does not turn ON:

  • Map lamp

  • Room lamp

  • Personal lamp

  • Map lamp control/ground circuit

  • Map lamp bulb

  • Map lamp assembly

Map lamp control circuit

Refer to Component Function Check.

  • Room lamp control/ground circuit

  • Room lamp bulb

  • Map lamp assembly

Room lamp control circuit

Refer to Component Function Check.

  • Personal lamp control/ground circuit

  • Personal lamp bulb

  • Map lamp assembly

Personal lamp control circuit

Refer to Component Function Check.

  • Map lamp does not turn ON even though the door is open (it turns on when turning the map lamp ON).

  • Map lamp does not turn OFF even though the door is closed.

  • Door switch circuit

  • Door lock assembly (door switch)

  • BCM

Door switch circuit

Refer to Component Function Check.

  • Map lamp control circuit

  • Map lamp assembly

  • BCM

Map lamp control circuit

Refer to Component Function Check.

  • Room lamp does not turn ON even though the door is open (it turns on when turning the room lamp ON).

  • Room lamp does not turn OFF even though the door is closed.

  • Room lamp control circuit

  • Map lamp assembly

Room lamp control circuit

Refer to Component Function Check.

  • Personal lamp does not turn ON even though the door is open (it turns ON when turning the personal lamp ON).

  • Personal lamp does not turn OFF even though the door is closed.

  • Personal lamp control circuit

  • Map lamp assembly

Personal lamp control circuit

Refer to Component Function Check.

  • Mood lamp does not turn ON.

  • Mood lamp does not turn OFF.

  • Mood lamp control circuit

  • Each mood lamp

  • BCM

Mood lamp control circuit

Refer to Component Function Check.

  • Luggage room lamp does not turn ON even though the back door is open.

  • Luggage room lamp does not turn OFF even though the back door is closed.

  • Back door lock assembly (ajar switch) circuit

  • Back door lock assembly (ajar switch)

  • BCM

Ajar switch circuit

Refer to Component Function Check .

  • Luggage room lamp control circuit

  • Luggage room lamp bulb

  • BCM

Luggage room lamp control circuit

Refer to Component Function Check.
Vanity mirror lamp does not turn ON.

  • Vanity mirror lamp power supply/ground circuit

  • Sun visor (vanity mirror lamp switch)

  • Vanity mirror lamp bulb

Vanity mirror lamp control circuit

Refer to Diagnosis Procedure.
Push-button ignition switch illumination does not illuminate.

  • Push-button ignition switch illumination control/ground circuit

  • Push-button ignition switch

  • Intelligent Key unit

Push-button ignition switch illumination control circuit

Refer to Diagnosis Procedure.
Interior room lamp battery saver does not activate.

  • Interior room lamp relay control circuit

  • Interior room lamp relay

  • Fuse block (J/B)

  • BCM

Interior room lamp power supply circuit

Refer to Diagnosis Procedure.
    Dtc/circuit Diagnosis. Push-Button Ignition Switch Illumination Control Circuit
    Component Function Check CHECK PUSH-BUTTON IGNITION SWITCH ILLUMINATION OPERATION With operating the push-button ignition switch, check that the push-button ignition switch illu...
    Removal and Installation. Map Lamp
    Exploded View Headlining assembly Map lamp assembly Map lamp housing Bulb Lens Map lamp finisher : Pawl : Metal clip Removal and Installation REMOVALCAUTION: Disconnect the batt...

    Other materials:

    Operation
    Switch Name and Function OPERATION AND DISPLAY OF AUTOMATIC AIR CONDITIONING SYSTEMDisplay: Display in A/C switch assembly Air conditioning operation status is indicated on display in A/C switch assembly. Air conditioning status display screen is indicated when MODE switch is pressed while ...

    Ignition Coil with Power Transistor
    Component Inspection CHECK IGNITION COIL WITH POWER TRANSISTOR-1 Turn ignition switch OFF. Disconnect ignition coil harness connector. Check resistance between ignition coil terminals as per the following. Ignition coil Condition Resistance + − Terminal 1 ...

    Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
    Work Flow CUSTOMER INTERVIEWInterview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments; Refer to Diagnostic Work ...