Nissan Rogue (T33) 2021-Present Service Manual: Automatic Air Conditioning :: Dtc/circuit Diagnosis
- B20c7-11 A/c Clutch
- B20c7-15 A/c Clutch
- B20c8-14 Ecv (electrical Control Valve)
- B2480-93 Rear Air Mix Door Motor
- B24a0-49 A/c Auto Amp.
- B24a1-16 A/c Auto Amp. Power Supply
- B24a1-17 A/c Auto Amp.
- B24a2-55 Configuration Not Implement
- B24a4-11 Intake Sensor
- B24a4-15 Intake Sensor
- B24a6-11 in-Vehicle Sensor
- B24a6-15 in-Vehicle Sensor
- B24b4-02 A/c Control Comm
- B24c6-12 Blower Motor Control
- B24c6-14 Blower Motor Control
- B24f4-12 Heated Steering Wheel Relay
- B24f4-14 Heated Steering Wheel Relay
- B24f5-93 Mode Door Motor
- B24f6-93 Intake Door Motor
- B24f7-93 Air Mix Door Motor 1
- B24f8-93 Air Mix Door Motor 2
- U1ca1-08 Lin Communication 2
- U1ca2-08 Lin Communication 3
- U1caa-02 Mode Door Motor
- U1cab-02 Intake Door Motor
- U1cac-02 Air Mix Door Motor 1
- U1cad-02 Air Mix Door Motor 2
- U1cae-02 Rear Air Mix Door Motor
- U1cb1-02 A/c Control 2 Communication
- U2140-87 Can Comm Err (ecm)
- U2148-87 Can Comm Err (brake Control Unit)
- U214e-87 Can Comm Err (combination Meter)
- U214f-87 Can Comm Err (bcm)
- U2154-87 Can Comm Err (miu)
- U215b-87 Can Comm Err (ipdm E/r)
- Power Supply and Ground Circuit
- Sunload Sensor
- Door Motor
- Front Blower Motor
- Magnetic Clutch
- Ecv (electrical Control Valve)
- Ptc Heater
Other materials:
B24a1-16 A/c Auto Amp. Power Supply
DTC Description
DTC DETECTION LOGIC DTC No.
CONSULT screen terms
(Trouble diagnosis content) DTC detection condition
B24A1-16
A/C AUTO AMP. POWER SUPPLY
(Air conditioning automatic amplifier power supply)
Diagnosis condition
Ignition switch ON
Signal (Terminal)
Accessory p ...
Power Supply and Ground Circuit
Ecm
Diagnosis Procedure
CHECK THE BATTERY CABLE
Turn ignition switch OFF.
Check the battery cable for tightening enough.
NOTE:
Check the continuity between the battery cable and the battery terminal.
Is the inspection result normal?
YES>>
GO TO 2
...
It Can Communication Circuit
Diagnosis Procedure
CHECK NETWORK DIAGNOSIS
Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction.
Are the diagnostic CAN communication circuit normal?
YES>>
GO TO 2.
NO>>
Check and repair diagnostic CAN commu ...