Nissan Rogue (T33) 2021-Present Service Manual: B24a2-55 Configuration Not Implement

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)
DTC detection condition
B24A2-55

Configuration not implement

(Configuration not implement)
Diagnosis condition Ignition switch ON
Signal (Terminal) —
Threshold Nissan Ariya Vehicle specification is not written
Diagnosis delay time 2 seconds or more

POSSIBLE CAUSE

Configuration is not completed

FAIL-SAFE

—

DTC CONFIRMATION PROCEDURE

PERFORM SELF-DIAGNOSIS

CONSULT

  1. Ignition switch ON.

  2. Select “Self diagnosis result� mode of “HVAC�.

  3. Check DTC.

Is DTC detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

DTC Diagnosis Procedure

PERFORM CONFIGURATION

Perform configuration. Refer to Description.

>>

Inspection End.

    B24a1-16 A/c Auto Amp. Power Supply
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A1-16 A/C AUTO AMP. POWER SUPPLY (Air conditioning automa...
    B24a4-11 Intake Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A4-11 INTAKE SENSOR (Intake sensor) Diagnosis condition I...

    Other materials:

    Removal and Installation. Terminal Plate
    Exploded View 1. Terminal plate cover 2. Terminal plate 3. Terminal plate bracket A. Harness (rear) B. Harness (center) C. Harness (front) : Pawl         Removal and Installation REMOVALDisconnect the 12V battery negative a ...

    U0074-00 Av Communication
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0074-00 Control module comm Bus B Off (Control module communication bus B off) Diagnosis condition When ignition switch is ON Signal (terminal) AV communic ...

    Symptom Diagnosis. Moonroof Does Not Operate Properly
    Description Moonroof does not operate normally. Moonroof tilt up/down, open/close does not operate. Moonroof tilt up/down, open/close operation is slow. Judder occurs during open/close operation of moonroof. Diagnosis Procedure CHECK MOONROOF UNIT ASSEMBLY Check the following it ...