Nissan Rogue Owners Manual: Pre-driving checks and adjustments
- Keys
- Remote keyless entry (if so equipped)
- NISSAN Intelligent Key® (if so equipped)
- NISSAN Vehicle Immobilizer System keys
- Doors
- Remote keyless entry system (if so equipped)
- NISSAN Intelligent Key® (if so equipped)
- Operating range
- Door locks/unlocks precaution
- NISSAN Intelligent Key® Operation
- How to use the remote keyless entry function
- Troubleshooting guide
- Hood
- Liftgate
- Fuel-filler door
- Tilt/telescopic steering
- Sun visors
- Mirrors
Map lights
Map lights
Push the button to turn the map lights on. To turn
them off, press the button again.
CAUTIONDo not use for extended periods of time
with the engine stopped. This could result ...
Keys
Keys
Jackknife type key
Integrated door lock keyfob with transponder
chip
Key number plate
...
Other materials:
DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM)
BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis
Procedure
Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram".
1. CHECK FUSE
Check that the following fuse i ...
Starting the engine (models with NISSAN
Intelligent Key® system)
Apply the parking brake.
Move the shift lever to P (Park) or N (Neutral).
P (Park) is recommended.
The starter is designed not to operate if
the shift lever is in any of the driving
positions.
Push the ignition switch to the ON position.
Depress the brake pedal and pus ...
System
EPS SYSTEM
EPS SYSTEM : System Description
SYSTEM DIAGRAM
INPUT/OUTPUT SIGNAL
Communicates the signal from each control unit via CAN communication.
Control unit
Signal status
ECM
Transmits the following signal to EPS control unit via CAN
communica ...
