Nissan Rogue (T33) 2021-Present Service Manual: Wireless Charger :: Symptom Diagnosis. Wireless Charger System Symptoms

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Power Outlet / Wireless Charger :: Symptom Diagnosis. Wireless Charger System Symptoms

Wireless Charger System Symptoms

Symptom Table

RELATED TO WIRELESS CHARGER

Make sure the wireless charger is not in a deactivation condition before starting diagnosis. Refer to System Description.

Symptoms Check items Possible malfunction location/Action to take
Wireless charging does not start Ignition switch is not placed ON. Place ignition switch ON.
Using non-Qi-certified smart phones Smartphones not supporting Qi format are unable to charge wirelessly.
Using Qi-certified smart phones. When a Qi-certified smart phone starts charging, an orange indicator lamp flashes. (The indicator lamp turns off after flashing for 8 seconds.)

  1. Confirm if any foreign matters are on the charging pad.

  2. If the wireless charger and/or smart phone are/is overheated, leave them/it to cool off.

  3. Perform self-diagnosis with CONSULT. Perform detected DTC self-diagnosis. Refer to DTC Index.
The wireless charger indicator lamp does not turn ON/flash. Wireless charger unit power supply and ground circuit malfunction. Refer to Diagnosis Procedure.
    Wireless Charger. Dtc/circuit Diagnosis
    B1b00-08 Can Communication DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis contents) DTC detection condition B1B00-08 CAN COMMUNICATION (CAN COMM...
    Wireless Charger. Removal and Installation
    Wireless Charger Unit Removal and Installation REMOVALRemove the console finisher assembly. Refer to Removal and Installation. Press the wireless charger unit pawl from the back...

    Other materials:

    Dtc/circuit Diagnosis. Combination Switch Output Circuit
    Diagnosis Procedure CHECK OUTPUT CIRCUIT Ignition switch ON. Turn ON any switch in the system that is malfunctioning. Check duty ratios between BCM harness connector and ground by using an oscilloscope. With type A meter System + − Voltage (Approx.) BCM Connector Termi ...

    Manual operation
    Fan speed control: Press to increase or decrease fan speed manually. Air intake control: Each press of toggles between: Recirculated air (indicator ON) Outside air (indicator OFF) Press and hold for 2 seconds to return to AUTO intake control Air flow control: Press to select: – Center ...

    Exhaust Valve Timing Intermediate Lock Control Solenoid Valve
    Component Inspection CHECK EXHAUST VALVE TIMING INTERMEDIATE LOCK CONTROL SOLENOID VALVE-1 Turn ignition switch OFF. Disconnect exhaust valve timing intermediate lock control solenoid valve harness connector. Check the resistance between exhaust valve timing intermediate lock control ...