Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Seats, seat belts and Supplemental Restraint System (SRS)
- Supplemental front-impact air bags — essential safety components providing frontal collision protection in the Nissan Rogue.
- Front passenger air bag status light — indicator showing the operational status of the front passenger air bag in the Nissan Rogue.
- Occupant classification sensors (weight sensors) — sensors that detect passenger presence and weight for optimized air bag deployment.
- Front central seat-mounted side-impact supplemental air bag* — a central side-impact air bag positioned between the front seats*.
- Seat belts — primary restraint systems designed to protect all Nissan Rogue occupants.
- Head restraints/headrests — supports designed to reduce the risk of neck injuries.
- Roof-mounted curtain side-impact and rollover supplemental air bags — curtain air bags offering protection in side impacts and rollover situations.
- Rear armrest — a rear-seat armrest enhancing passenger comfort.
- Rear outboard seat-mounted side-impact supplemental air bags — side-impact air bags for the outer rear seating positions.
- Driver and front passenger supplemental knee air bags — additional knee air bags that provide lower-body protection.
- Front seats — ergonomically designed front seats for comfort and support.
- Front seat-mounted side-impact supplemental air bags* — side-impact air bags integrated into the front seats*.
- Seat belt pretensioners — devices that tighten seat belts during sudden deceleration for improved restraint.
- Rear seats
- Child restraints — compatible with child restraint systems used in the Nissan Rogue.
- LATCH (Lower Anchors and Tethers for CHildren) system (for rear seats) — standardized anchors to securely install child seats.
- Child restraint anchor points (for top tether strap) — designated tether anchor points for securing child seats.
*: if so equipped
Other materials:
Removal and Installation. Power Window Main Switch
Removal and Installation
CAUTION:
Never bend the fixing pawl of power window switch finisher.
REMOVALRemove power window switch finisher. Refer to Removal and Installation.
Remove power window main switch fixing screws , and then remove power window main switch from power window switch finisher ...
Egr Temperature Sensor
Component Inspection
CHECK EGR TEMPERATURE SENSOR
Turn ignition switch OFF.
Disconnect EGR temperature sensor harness connector.
Remove EGR temperature sensor.
Check resistance between EGR temperature sensor terminals.
EGR temperature sensor Condition Resistance
+ − ...
P212d Admission Valve Position Sensor
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P212D
00
Throttle position sensor/switch
(Throttle Position Sensor/Switch "G" Circuit High)
Diagnosis condition
IGN ON
Signal (terminal)
ADM valve posi ...
