Nissan Rogue (T33) 2021-Present Service Manual: Warning/indicator/chime List

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / System Description :: System (intelligent Key System) / Warning/indicator/chime List

Warning Lamp/Indicator (Information Display)

Item Reference
Door open warning Refer to Door Open Warning
Engine start information Refer to Engine Start Information
Intelligent Key low battery warning Refer to Intelligent Key Low Battery Warning
Intelligent Key system malfunction Refer to Intelligent Key System Malfunction
Key ID verification information Refer to Key ID Verification Information
Take away warning Refer to Take Away Warning (Information Display)

Warning Chime

Item Reference
Door lock operation warning Refer to Door Lock Operation Warning.
Take away warning (buzzer) Refer to Take Away Warning (Buzzer).
    Information Display (combination Meter)
    Door Open Warning DESIGN/PURPOSEInformation display warns the driver that each door is open or is not fully closed. Symbol Message – SYNCHRONIZATION WITH MASTER WARNING LAMPSy...
    System Description. System (back Door Opener System)
    System Description SYSTEM DIAGRAM Component Function Back door opener switch Refer to Back Door Opener Switch. Back door opener actuator Refer to Back Door Lock Assembly. ABS ac...

    Other materials:

    Système de refroidissement du moteur
    Informations de base Le système de refroidissement du moteur du Nissan Rogue est rempli en usine avec un mélange prédilué composé de 50 % de liquide de refroidissement antigel d’origine NISSAN Long Life Antifreeze/Coolant (bleu) et de 50 % d’eau, assurant une protection antigel efficace to ...

    Preparation
    Special Service Tools The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description  —  (NI-44372) Pull gauge Measuring steering wheel turning force and ball joint swinging force KV40107300 (NI-51751) Boot ban ...

    Power Supply and Ground Circuit
    Combination Meter Diagnosis Procedure CHECK FUSE Check that the following fuses are not blown: Unit Location Fuse No. Capacity Combination meter Fuse block (J/B) 29 5A 6 5A Is the fuse blown? YES>> Replace the blown fuse after repairing the affected circu ...