Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Troubleshooting guide

Verify the location of all Intelligent Keys that are programmed for your Nissan Rogue. If another Intelligent Key is within range or inside the vehicle, the system may respond differently than expected.

Symptom: When stopping the engine > The Shift to P range warning appears on the display and the inside warning chime sounds continuously.

  • Possible cause: The shift position is not in the P (Park) position.
  • Remedy: Push the park button to engage the P (Park) position.

Symptom: When stopping the engine > "No Key Press and Hold to Stop Engine" message appears on the display.

  • Possible cause: The Intelligent Key is not inside the vehicle.
  • Remedy: Carry the Intelligent Key inside the vehicle and push the ignition switch once to stop the engine.
  • Possible cause: There is no Intelligent Key present or the battery charge is low.
  • Remedy: Rapidly push the ignition switch 3 consecutive times or push and hold the ignition switch for more than 2 seconds to stop the engine.

Symptom: When opening the driver's door to get out of the vehicle > The door/liftgate open warning appears on the display.

  • Possible cause: The ignition switch is in the ON position.
  • Remedy: Place the ignition switch in the OFF position.

Symptom: When closing the door after getting out of the vehicle > The No Key Detected warning appears on the display, the outside chime sounds three times and the inside warning chime sounds for approximately 3 seconds.

  • Possible cause: The engine is running.
  • Remedy: Place the ignition switch in the OFF position.

Symptom: When closing the door after getting out of the vehicle > The Rear Door Alert warning message appears on the display, the horn sounds three times, pauses, and sounds three more times, or a Check Rear Seat for All Articles warning appears on the display.

  • Possible cause: The Rear Door Alert is activated.
  • Remedy: Check the rear seat for all articles, clear the Rear Door Alert warning message by using the steering switches.

Symptom: When pushing the door handle request switch (if so equipped) > The outside chime sounds for approximately 3 seconds.

  • Possible cause: The Intelligent Key is inside the Nissan Rogue.
  • Remedy: Carry the Intelligent Key with you.

Symptom: When pushing the ignition switch to start the engine > The Key Battery Low warning appears on the display.

  • Possible cause: The Intelligent Key battery charge is low.
  • Remedy: Replace the battery with a new one.

Symptom: When pushing the ignition switch > The Key System Error warning appears on the display.

  • Possible cause: A malfunction has occurred with the Intelligent Key system.
  • Remedy: It is recommended that you contact a NISSAN dealer.
    Walk away lock function
    When you walk away from the Nissan Rogue with the Intelligent Key, the vehicle will be locked automatically by the walk away lock function (the operation range is around 7 ft (2...
    How to use remote keyless entry function
    WARNING Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the device manufacturer for possible influences before using the ...

    Other materials:

    Kr15ddt. Service Data and Specifications (sds). Service Data and Specifications (sds)
    Service Data and Specifications (sds) Periodical Maintenance Specification ENGINE COOLANT CAPACITY (APPROXIMATE)Unit: (US qt, Imp qt) Engine coolant capacity (With reservoir tank at “MAX” level) 8.5 (9, 7-1/2)   Reservoir tank engine coolant capacity (At “MAX” level) 0. ...

    Mesures de sécurité à observer lors de la conduite
    Votre Nissan Rogue est conçu pour offrir une conduite stable et sûre aussi bien sur route que lors d’une utilisation occasionnelle en tout-terrain. Toutefois, il est important d’éviter de circuler dans des eaux profondes, des zones fortement boueuses ou des terrains extrêmes, car ce véhicul ...

    Evap Control System Pressure Sensor
    Component Inspection CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR Turn ignition switch OFF. Remove EVAP control system pressure sensor with its harness connector connected from EVAP canister. Always replace O-ring with a new one. Install a vacuum pump to EVAP control system pressure se ...