Nissan Rogue (T33) 2021-Present Service Manual: Throttle Control Motor

Component Inspection

CHECK THROTTLE CONTROL MOTOR

  1. Turn ignition switch OFF.

  2. Disconnect electric throttle control actuator harness connector.

  3. Check the resistance between electric throttle control actuator terminals as per the following.

    Electric throttle control actuator Condition Resistance
    Terminal
    5 6 Temperature 25°C (77°F) 1 – 15 Ω

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace electric throttle control actuator. Refer to Exploded View.

    Stop Lamp Switch
    Component Inspection CHECK STOP LAMP SWITCH-1 Turn ignition switch OFF. Disconnect stop lamp switch harness connector. Check the continuity between stop lamp switch terminals as...
    Throttle Position Sensor
    Component Inspection CHECK THROTTLE POSITION SENSOR Turn ignition switch OFF. Reconnect all harness connectors disconnected. Refer to Work Procedure. Turn ignition switch ON. Se...

    Other materials:

    Dtc/circuit Diagnosis. Rear Window Defogger
    Component Function Check CHECK REAR WINDOW DEFOGGER FUNCTION CONSULT Ignition switch ON. Select “Rear defogger” in “Active test” mode of "BCM". Touch “On”. Check that the back door window glass is getting warmer. NOTE: When glass is hot, never start inspection un ...

    C1f00-54 Hands Off Threshold Incomplete
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition   C1F00 54 CONTROL UNIT (Control unit) Diagnosis condition — Signal (terminal) — Threshold Steering Torque C ...

    System Description. Diagnosis System (bcm)
    Common Item CONSULT Function - COMMON ITEM BCM Refer to CONSULT Function (BCM - COMMON ITEM). Theft Alm CONSULT Function - THEFT ALM BCM Refer to CONSULT Function (BCM - THEFT ALM). ...