Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Diagnosis System (bcm)

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / System Description :: Diagnosis System (bcm)

Common Item

CONSULT Function - COMMON ITEM

BCM Refer to CONSULT Function (BCM - COMMON ITEM).

Door Lock

CONSULT Function - DOOR LOCK

BCM Refer to CONSULT Function (BCM - DOOR LOCK).

Intelligent Key

CONSULT Function - INTELLIGENT KEY

BCM Refer to CONSULT Function (BCM - INTELLIGENT KEY).

Trunk

CONSULT Function - TRUNK

BCM Refer to CONSULT Function (BCM - TRUNK).
    System Description. System (automatic Back Door System)
    System Description SYSTEM DIAGRAMThe automatic back door system performs the automatic open/close operation of the back door by operating the automatic back door switch, automat...
    System Description. Diagnosis System (hands Free Module)
    Diagnosis Description APPLICATION ITEMCONSULT performs the following functions via CAN communication with Intelligent Key unit: Diagnosis mode Function Self diagnosis result Dis...

    Other materials:

    Exhaust Valve Timing Intermediate Lock Control Solenoid Valve
    Component Inspection CHECK EXHAUST VALVE TIMING INTERMEDIATE LOCK CONTROL SOLENOID VALVE-1 Turn ignition switch OFF. Disconnect exhaust valve timing intermediate lock control solenoid valve harness connector. Check the resistance between exhaust valve timing intermediate lock control ...

    Chassis Can Communication 3 Circuit
    Diagnosis Procedure CHECK CAN DIAGNOSIS Check the "Network Diagnosis" results from CONSULT to see that the ITS CAN communication 1 circuit, ITS CAN communication 4 circuit and diagnostic CAN communication circuit have no malfunction. Are the ITS CAN communication 1 circuit, ITS CAN communicat ...

    Aluminum Repair
    Sheet Metal Work (aluminum) Sheet Metal Work (Aluminum) Repairing aluminum alloy panels is basically the same as repairing steel panels. Special considerations for repairing aluminum alloy are listed below. Sanding Aluminum alloy panels are softer than steel plates. It is important to se ...