Nissan Rogue (T33) 2021-Present Service Manual: System Description :: Diagnosis System (hands Free Module)

Diagnosis Description

APPLICATION ITEM

CONSULT performs the following functions via CAN communication with Intelligent Key unit:

Diagnosis mode Function
Self diagnosis result Display non-network DTC which Intelligent Key unit memorizes
ECU identification The Intelligent Key unit part number is displayed
Work supports Changes the setting for each system function
Data monitor The Intelligent Key unit input/output signals are displayed
Replace ECU Writes the Nissan Ariya vehicle specification when replacing the Initelligent Key unit
ECU Reprogramming Allows reprogramming when replacing the Initelligent Key unit

Work support

Support item Description
Remote engine starter Remote engine start function can be changed to operation with this item
Inside/outside antenna diagnosis Performs check of inside and outside key antennas
TRUNK/GLASS HATCH OPEN Allow changing of the answer back when trunk/glass hatch is opened by open switch operation
Answer back

Reminder function (door request switch) mode can be selected from the following with this mode:

  • On: Buzzer reminder operate

  • Off: Buzzer reminder non-operate

Remote engine starter Remote engine start function can be changed to operation with this item
Inside/outside key antenna OFF
  • Turn OFF the communication between the Intelligent Key and the outside/inside key antenna

  • The lock/unlock function that operates the door request switch and the engine start (READY set) funciton cannot be used

Walk away lock answer back funciton setting The operation changes the setting of the answer back function (buzzer) by walk away lock
Intelligent Key system answer back function setting Changes the setting of answer back (buzzer) when door lock/unlock by operating the door request switch and Intelligent Key button

Self Diagnostic Result

Refer to DTC Index.

Data Monitor

NOTE:

The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item Condition
Intelligent Key unit blank status Indicates [On/Off] status of Intelligent Key unit registered or not registered status
Intelligent Key unit power supply status Indicates [On/Off] status of Intelligent Key unit power supply status
KEY ID1 Indicates [On/Off] condition when key ID that receives register or not register status
KEY ID2
KEY ID3
KEY ID4
Ignition ON (IPDM E/R) Indicates the status of the battery voltage by Intelligent Key unit
IGN ON (IPDM E/R) Indicates [On/Off] condition of IGN power supply from IPDM E/R via CAN communication
Nissan Ariya Vehicle speed (ABS) Display the vehicle speed signal received from ABS actuator and electrical unit by numerical value [km/h]
Nissan Ariya Vehicle speed (meter) Display the vehicle speed signal received from combination meter by numerical value [km/h]
Total distance Display the distance signal received from ABS actuator and electrical unit by numerical value [km]
Keyfob button1 Indicates [On/Off] condition of Intelligent Key button pressed
Keyfob button2
Keyfob button3
Keyfob button4
Keyfob button5
Back door/trunk opener switch Indicates [On/Off] condition of back door opener switch
Key ID (last) Displays the last key ID received by the Intelligent Key unit.
Keyfob#1 cabin area Indicates [On/Off] condition of Intelligent Key is in/out of cabin detection area
Keyfob#1 undefined area Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#1 rear bumper area Indicates [On/Off] condition of Intelligent Key is in/out of rear bumper detection area
Keyfob#2 cabin area Indicates [On/Off] condition of Intelligent Key is in/out of cabin detection area
Keyfob#2 undefined area Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#2 rear bumper area Indicates [On/Off] condition of Intelligent Key is in/out of rear bumper detection area
Keyfob#3 cabin area Indicates [On/Off] condition of Intelligent Key is in/out of cabin detection area
Keyfob#3 undefined area Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#3 rear bumper area Indicates [On/Off] condition of Intelligent Key is in/out of rear bumper detection area
Keyfob#4 cabin area Indicates [On/Off] condition of Intelligent Key is in/out of cabin detection area
Keyfob#4 undefined area Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#4 rear bumper area Indicates [On/Off] condition of Intelligent Key is in/out of rear bumper detection area
Keyfob operation Display the pressed button of Intelligent Key
Push switch Indicates [On/Off] condition of push-button ignition switch
Request switch (Front right) Indicates [On/Off] condition of front door request switch RH
Request switch (Front left) Indicates [On/Off] condition of front door request switch LH
Request switch (Back Door) Indicates [On/Off] condition of back door request switch
Registration Key ID status Indicates [On/Off] condition of Intelligent Key registered status
Keyfob#1 outside area (LH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#1 outside area (RH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#2 outside area (LH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#2 outside area (RH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#3 outside area (LH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#3 outside area (RH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#4 outside area (LH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#4 outside area (RH) Indicates [On/Off] condition of Intelligent Key is in/out of detection area
Keyfob#1 battery low Displays the Intelligent Key battery level is low
Keyfob#2 battery low
Keyfob#3 battery low
Keyfob#4 battery low
Battery voltage (IPDM E/R) Displays the battery voltage signal received from IPDM E/R via CAN communication
Nissan Ariya Vehicle condition Displays the power supply position status
Steering lock unit power output

NOTE:

This item is displayed, but cannot be monitored

    System Description. Diagnosis System (bcm)
    Common Item CONSULT Function - COMMON ITEM BCM Refer to CONSULT Function (BCM - COMMON ITEM). Door Lock CONSULT Function - DOOR LOCK BCM Refer to CONSULT Function (BCM - DOOR LO...
    System Description. Diagnosis System (automatic Back Door Control Unit)
    CONSULT Function (AUTOMATIC BACK DOOR CONTROL UNIT) APPLICATION ITEMCONSULT performs the following functions via CAN communication with automatic back door control unit: Diagnos...

    Other materials:

    Dtc/circuit Diagnosis. C18de-82 Brake Power Supply Back up Unit
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms DTC detection condition C18DE 82 Backup power supply unit communication Diagnosis condition When Ignition switch is ON. Signal (terminal) Brake power supply backup unit signal Threshold When a malfunct ...

    Parking brake
    Basic information WARNING Never drive the vehicle with the parking brake applied. The brake will overheat and fail to operate and will lead to an accident. Never release the parking brake from outside the vehicle. If the vehicle moves, it will be impossible to push the foot brake pedal and will l ...

    I-BSI driving situations
    Basic information Indicator on Indicator off Indicator flashing Illustration 1 — Approaching from behind Another vehicle approaching from behind Illustration 1: When another vehicle enters the monitored area from the rear in an adjacent lane, the side indicator light on the Nissan Rogue i ...