Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Reminder Function Does Not Operate

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Symptom Diagnosis :: Reminder Function Does Not Operate

Door Request Switch

Description

Reminder function does not operate using door request switch.

Diagnosis Procedure

CHECK “ANSWER BACK” SETTING IN “WORK SUPPORTS”

CONSULT

  1. Select “Answer back” in “Work supports” mode of "INTELLIGENT KEY".

  2. Check the “Answer back” in “Work supports”.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Set “On” in “Answer back”.

CHECK HAZARD FUNCTION

Check hazard function.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK INTELLIGENT KEY WARNING BUZZER

Check Intelligent Key warning buzzer.

Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

REPLACE INTELLIGENT KEY UNIT

  1. Replace Intelligent Key unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

Intelligent Key

Description

Reminder function does not operate using Intelligent Key.

Diagnosis Procedure

CHECK “ANSWER BACK” SETTING IN “WORK SUPPORTS”

  1. Select “Answer back” in “Work supports” mode of "INTELLIGENT KEY".

  2. Check the “Answer back” in “Work supports”.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Set “On” in “Intelligent Key system answer back function setting”.

CHECK “HORN BEEPS ON LOCK” SETTING IN COMBINATION METER

Check “Horn beeps on lock” setting is “ON”.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Set “ON” in “Horn beeps on lock”.

CHECK HAZARD FUNCTION

Check hazard function.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

CHECK HORN FUNCTION

Check horn function.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the malfunctioning parts.

REPLACE INTELLIGENT KEY UNIT

  1. Replace Intelligent Key unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Key Reminder Function Does Not Operate
    Diagnosis Procedure CHECK DOOR SWITCH Check door switch. Refer to Component Function Check. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replac...
    Symptom Diagnosis. Take Away Warning Does Not Operate
    Diagnosis Procedure CHECK COMBINATION METER BUZZER Check combination meter buzzer. Refer to Diagnosis Procedure (Full TFT meter) or Diagnosis Procedure (7 inch information displ...

    Other materials:

    P2123 App Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2123 00 APP SEN 1/CIRC (Throttle/Pedal position sensor/switch D circuit high) Diagnosis condition Engine running at idle Signal (terminal) Accelerator ...

    Symptom Diagnosis. Approach Unlock/walk Away Lock Function Does Not Operate (all Keys)
    Description Approach unlock/walk away lock function does not operate.NOTE: Before starting diagnosis check that vehicle condition is as shown in "Conditions of Nissan Ariya vehicle", and check each symptom. SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOM) Door lock operation (remot ...

    Power Supply and Ground Circuit
    Diagnosis Procedure CHECK FUSE Check that the following fuse is not blown: Signal name Fuse No. Ignition power supply 40 (10 A) Is the fuse blown? YES>> Replace the blown fuse after repairing the affected circuit. NO>> GO TO 2. CHECK ADAS CONTROL UNIT 2 POWER SUPP ...