Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Key Reminder Function Does Not Operate

Diagnosis Procedure

CHECK DOOR SWITCH

Check door switch.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace the malfunctioning parts.

CHECK UNLOCK SENSOR

Check unlock sensor.

Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace the malfunctioning parts.

CHECK BACK DOOR SWITCH

Check back door switch.

Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 4.

NO>>

Repair or replace the malfunctioning parts.

CHECK INSIDE KEY ANTENNA

Check inside key antenna.

  • NATS antenna amp.: Refer to DTC Diagnosis Procedure.

  • Inside key antenna: Refer to DTC Diagnosis Procedure.

Is the inspection result normal?

YES>>

GO TO 5.

NO>>

Repair or replace the malfunctioning parts.

REPLACE BCM

  1. Replace BCM. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Ign Off Interlock Door Unlock Function Does Not Operate
    Diagnosis Procedure CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER Check “Auto Door Unlock” setting is “IGN OFF”. Is the inspection result normal? YES>>...
    Symptom Diagnosis. Reminder Function Does Not Operate
    Door Request Switch Description Reminder function does not operate using door request switch. Diagnosis Procedure CHECK “ANSWER BACK” SETTING IN “WORK SUPPORTS” CONSULT ...

    Other materials:

    Symptom Diagnosis. Front Passenger Side Power Window Does Not Operate
    When Both Power Window Main Switch and Front Power Window Switch (passenger Side) Are Operated Diagnosis Procedure CHECK FRONT POWER WINDOW SWITCH (PASSENGER SIDE) POWER SUPPLY AND GROUND CIRCUIT Check front power window switch (passenger side) power supply and ground circuit. Refer to Diagnosis ...

    Garage mode system
    The liftgate can be set to open to a specific height by performing the following: 1. Open the liftgate. 2. Pull the liftgate down to the desired position and hold the liftgate (the liftgate will have some resistance when being manually adjusted). 3. While holding the liftgate in position, press an ...

    Dtc/circuit Diagnosis. U2250-87 Can Comm Err (air Bag)
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped ...