Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Electric Power Steering Warning Lamp Does Not Turn on

Nissan Rogue (T33) 2021-Present Service Manual / Steering :: Steering Control System / Symptom Diagnosis :: Electric Power Steering Warning Lamp Does Not Turn on

Description

The power steering warning lamp does not illuminate when the ignition switch is ON (lamp check).

Diagnosis Procedure

CHECK THE POWER STEERING WARNING LAMP

Perform trouble diagnosis for the power steering warning lamp system. Refer toComponent Function Check .

Is the inspection result normal?

YES>>

Check that the terminals and the connection of each connector are normal.

NO>>

Repair/replace harness, connector, terminal, fusible link or fuse.

    Dtc/circuit Diagnosis. Eps Warning Lamp
    Component Function Check CHECK THE ILLUMINATION OF THE ELECTRIC POWER STEERING WARNING LAMP Check that the electric power steering warning lamp turns ON when ignition switch ON....
    Symptom Diagnosis. Electric Power Steering Warning Lamp Does Not Turn Off
    Description Power steering warning lamp does not turn OFF several seconds after engine started. Diagnosis Procedure PERFORM SELF-DIAGNOSIS CONSULT Perform self diagnosis for “...

    Other materials:

    System Description. Component Parts. Moonroof System
    Moonroof System Component Description No. Component Function 1. Moonroof switch assembly Refer to Moonroof Switch Assembly. 2. Moonroof motor assembly Refer to Moonroof Motor Assembly. 3. Front door lock assembly RH (door switch) Detects door open/close condition ...

    C1f00-54 Hands Off Threshold Incomplete
    Without Propilot Assist 2.1 DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition   C1F00 54 CONTROL UNIT (Control unit) Diagnosis condition — Signal (terminal) — Threshold Steering Torque C ...

    P06e6 Internal Control Module
    DTC Description DESCRIPTIONECM supplies a voltage of 5 V to some of the sensors systematically divided into 3 groups, respectively. Accordingly, when a short circuit develops in a sensor power source, a malfunction may occur simultaneously in the sensors belonging to the same group as the s ...