Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Electric Power Steering Warning Lamp Does Not Turn Off

Nissan Rogue (T33) 2021-Present Service Manual / Steering :: Steering Control System / Symptom Diagnosis :: Electric Power Steering Warning Lamp Does Not Turn Off

Description

Power steering warning lamp does not turn OFF several seconds after engine started.

Diagnosis Procedure

PERFORM SELF-DIAGNOSIS

CONSULT

Perform self diagnosis for “EPS/Direct Adaptive Steering 3”.

Is any DTC detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 2.

CHECK POWER STEERING WARNING LAMP

Perform the trouble diagnosis of power steering warning lamp. Refer to Component Function Check.

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace power steering warning lamp system.

POWER STEERING CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT

Perform the trouble diagnosis of power steering control module power supply and ground. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Check that the terminals and the connection of each connector are normal.

NO>>

Repair / replace harness, connector, terminal, fuse, or fusible link.

    Symptom Diagnosis. Electric Power Steering Warning Lamp Does Not Turn on
    Description The power steering warning lamp does not illuminate when the ignition switch is ON (lamp check). Diagnosis Procedure CHECK THE POWER STEERING WARNING LAMP Perform tr...
    Symptom Diagnosis. Steering Wheel Turning Force Is Heavy or Light
    Description Steering wheel turning force is heavy or light. Diagnosis Procedure PERFORM SELF-DIAGNOSIS CONSULT Pull the parking brake switch. NOTE: Check to make sure that the p...

    Other materials:

    B20c7-11 A/c Clutch
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B20C7–11 A/C clutch (A/C clutch) [CIRCUIT SHORT TO GROUND] Diagnosis condition When A/C switch is ON Signal (Terminal) Magnetic clutch ON signal T ...

    Removal and Installation. Intelligent Key Battery
    Removal and Installation Release the lock knob at the back of the Intelligent Key and remove the mechanical key. Using a suitable tool, release outer key bracket (A) in direction shown. CAUTION: Never touch the circuit board or battery terminal. The Intelligant Key is water-re ...

    U1327-54 Mac Key
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition U1327-54 MAC key update (Message Authentication Code key update) Diagnosis condition - Signal (terminal) - Threshold MAC key is not written after so ...