Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Automatic Back Door Anti-Pinch Function Does Not Operate
Diagnosis Procedure
CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT
Check that DTC is not detected with automatic back door control unit.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Refer to DTC Index.
CHECK TOUCH SENSOR LH
Check touch sensor LH.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK TOUCH SENSOR RH
Check touch sensor RH.
Refer to DTC Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
REPLACE AUTOMATIC BACK DOOR CONTROL UNIT
-
Replace automatic back door control unit. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials:
Chassis Control. Basic Inspection
Diagnosis and Repair Work Flow
Work Flow
DETAILED FLOWINTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform
an interview utilizing Diagnostic Work Sheet and reproduce the symptom
as well as fully understand it. Ask customer about his/her complaints
...
Variable Compression Ratio Control Shaft 2 Rotation Angle Sensor
Component Inspection
CHECK VCR CONTROL SHAFT 2 ROTATION ANGLE SENSOR
Turn ignition switch OFF.
Disconnect VCR control shaft 2 rotation angle sensor harness connector.
Check the continuity between VCR control shaft 2 rotation angle sensor harness connectors.
VCR control shaft 2 rota ...
Basic Inspection. Consult/gst Checking System
Description
When CONSULT/GST is connected with a data link connector
equipped on the Nissan Ariya vehicle side, it will communicate with the
control unit equipped in the vehicle and then enable various kinds of
diagnostic tests.
: Instrument lower panel
Refer to CONSULT S ...