Nissan Rogue (T33) 2021-Present Service Manual: Symptom Diagnosis :: Automatic Back Door Functions Do Not Cancel

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Door & Lock / Symptom Diagnosis :: Automatic Back Door Functions Do Not Cancel

Diagnosis Procedure

CHECK “POWER BACK DOOR SETTING” IN COMBINATION METER

Check “Power back door setting” is in the OFF.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Set “Power back door setting” to “OFF”.

REPLACE AUTOMATIC BACK DOOR CONTROL UNIT

  1. Replace automatic back door control unit. Refer to Removal and Installation.

  2. Confirm the operation after replacement.

Is the result normal?

YES>>

Inspection End.

NO>>

Check intermittent incident. Refer to Intermittent Incident.

    Symptom Diagnosis. Automatic Back Door Warning Does Not Operate
    Description Automatic back door warning buzzer does not operate when automatic back door warning function are performed. Diagnosis Procedure CHECK INTELLIGENT KEY WARNING BUZZER...
    Symptom Diagnosis. Automatic Back Door Anti-Pinch Function Does Not Operate
    Diagnosis Procedure CHECK DTC WITH AUTOMATIC BACK DOOR CONTROL UNIT Check that DTC is not detected with automatic back door control unit. Is the inspection result normal? YES>...

    Other materials:

    Adas Control Unit. Ecu Diagnosis Information. Adas Control Unit 2
    Adas Control Unit 2 Without Propilot Assist 2.1 Reference Value VALUES ON THE DIAGNOSIS TOOLNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items. Monitor item ...

    Chassis Control. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and ...

    Diagnosis System (power Network Separate Relay)
    CONSULT Function (POWER NETWORK SEPARATE RELAY) APPLICATION ITEMSCONSULT performs the following functions via CAN communication using power network separate relay. Diagnosis mode Description Self Diagnostic Result Displays DTC stored in power network separate relay Displays freeze ...