Nissan Rogue (T33) 2021-Present Service Manual: Signal Buffer

CONSULT Function (BCM - SIGNAL BUFFER)

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item

[Unit]
Description

Brake switch 1

[On/Off]
Indicates [On/Off] condition of stop lamp switch 1.

Brake switch 2

[On/Off]
Indicates [On/Off] condition of stop lamp switch 2.

Clutch start switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Detention/Cancel switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Clutch end switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

    Multi Remote Ent
    CONSULT Function (BCM - MULTI REMOTE ENT) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) a...
    Trunk
    CONSULT Function (BCM - TRUNK) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable t...

    Other materials:

    Crevaison
    Système de contrôle de la pression des pneus (TPMS) Ce véhicule Nissan Rogue est équipé du système de contrôle de la pression des pneus (TPMS), conçu pour assister le conducteur dans la surveillance permanente de la pression des pneumatiques afin d’améliorer la sécurité, la stabilité ...

    P025b Fuel Pump Module a
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P025B 00 FUEL PUMP MODULE A (Fuel Pump Module "A" Control Circuit Range/Performance) Diagnosis condition Engine running Signal (terminal) — Thre ...

    Dtc/circuit Diagnosis. Eps Warning Lamp
    Component Function Check CHECK THE ILLUMINATION OF THE ELECTRIC POWER STEERING WARNING LAMP Check that the electric power steering warning lamp turns ON when ignition switch ON. Then, electric power steering warning lamp turns OFF after the engine is started. Is the inspection result normal? ...