Nissan Rogue (T33) 2021-Present Service Manual: Multi Remote Ent

Nissan Rogue (T33) 2021-Present Service Manual / Electrical & Power Control :: Body Control System / System Description :: Diagnosis System (bcm) / Multi Remote Ent

CONSULT Function (BCM - MULTI REMOTE ENT)

DATA MONITOR

NOTE:

The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor Item Condition

Stop/start switch

[On/Off] 		Indicates [On/Off] condition of idling stop OFF switch.

START SW

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.

Ignition switch

[On/Off]

NOTE:

This item is displayed, but cannot be monitored.
    Intelligent Key
    CONSULT Function (BCM - INTELLIGENT KEY) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) ap...
    Signal Buffer
    CONSULT Function (BCM - SIGNAL BUFFER) DATA MONITORNOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) appl...

    Other materials:

    P0079 Evt Control Solenoid Valve
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0079 00 Exhaust valve control solenoid (Exhaust Valve Control Solenoid Circuit Low Bank 1) Diagnosis condition Engine running at idle Signal (terminal) ...

    Settings
    Basic information The settings menu in the Nissan Rogue allows the user to adjust what appears on the vehicle information display and customize various onboard functions: VDC Setting Driver Assistance Head-Up Display (if so equipped) ECO Mode Setting TPMS Setting Clock Vehicle Settings Main ...

    Dtc/circuit Diagnosis. Door Mirror Defogger
    Component Function Check CHECK DOOR MIRROR DEFOGGER FUNCTION CONSULT Ignition switch ON. Select “Rear defogger” in “Active test” mode of "BCM". Touch “On”. Check that both side door mirror glasses are getting warmer. NOTE: When glass is hot, never start inspectio ...