Reclining (if so equipped)
1. Pull up the lever A.
2. Tilt the seatback backward. The rear seat reclines slightly for added comfort.
3. Release the lever to lock the seatback securely.
Folding
Before folding the rear seats
To fold down the seatback
To return the seatback
Raise the seatback until it fully latches into place.
Ensure the seat belts are clear of the latch mechanism before locking the seatback upright.
WARNING
Always reinstall and adjust them properly if they have been removed.
Do not stack cargo higher than the seatbacks. In a sudden stop or collision, unsecured items may cause injury.
WARNING
This is dangerous because the shoulder belt will not sit properly against your body. In a crash, you may be thrown against it and sustain serious neck or other injuries.
You could also slide under the lap belt and suffer serious internal injuries.
Armrest

Rear seats
Pull the armrest down as shown to use it.
Basic informationFront disc brake
Brake Burnishing
CAUTION:
Burnish contact surfaces between brake pads and disc brake
rotor according to the following procedure
after refinishing the disc brake rotor, replacing brake pads or if a soft
pedal occurs at very low
mileage.
Be careful of vehicle speed. Brakes ...
Map lights
Map lights
Push the button to turn the map lights on. To turn
them off, press the button again.
CAUTIONDo not use for extended periods of time
with the engine stopped. This could result
in a discharged battery.
Personal Lights (if so equipped)
Rear personal lights
To tu ...
U1000 CAN COMM circuit
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT
Detection Condition
Possible Cause
U1000
CAN COMM CIRC
[U1000]
When combination meter is not transmitting or receiving CAN
communication signals for 2 seconds or more.
CAN communication system
D ...