WARNING
The shoulder belt will not rest properly against your body, increasing the risk of neck or other serious injuries in an accident. You could also slide beneath the lap belt and suffer internal injuries.
Temperatures inside a closed Nissan Rogue can quickly rise to dangerous levels, posing severe risks to people and pets.
CAUTION
When adjusting seat positions, make sure no part of your body is near moving components to prevent injury or damage.
Front seats
Basic information
Your Nissan Rogue is equipped with seats that may feature manual or power adjustments. Follow the procedures in this section for proper seat positioning.
Front manual seat adjustment
Forward and backward:
1. Pull up the adjusting lever 1.
2. Slide the seat to the preferred position.
3. Release the lever to lock the seat securely.
Reclining:
1. Pull up the adjusting lever 2.
2. Adjust the seatback to the desired angle.
3. Release the lever to lock the seatback.
The reclining function helps drivers and passengers of different sizes achieve proper seat belt fit.
The seatback can also be reclined for resting when the vehicle is parked.
Seat lifter (if so equipped):
Lift or press the adjusting lever to raise or lower the seat height to your preference.
Front power seat adjustment
Operating tips:
Forward and backward:
Move the adjusting switch 1 forward or backward to reach the preferred seating position.
Reclining:
Move the adjusting switch 2 forward or backward to tilt the seatback to your desired angle.
This feature helps optimize seat belt positioning for occupants of various sizes.
The seatback can be reclined for comfort when the Nissan Rogue is parked.
Seat lifter (if so equipped):
Use the switch as shown to adjust the seat height or the front portion of the seat cushion.
Lumbar support (if so equipped)
The lumbar support feature enhances lower back support for the driver.
Press the switch to adjust the lumbar region until a comfortable position is reached.
NOTE:
The lumbar support motor continues to operate while the switch is pressed, even after reaching its maximum adjustment in either direction.
Seats
Rear seatsTowing your vehicle
When towing your vehicle, all jurisdictional and
local regulations for towing must be followed.
Incorrect towing equipment could damage your
vehicle. Towing instructions are available from a
NISSAN dealer. Local service operators are generally
familiar with the applicable laws and procedures
...
Operating range
Operating range
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range from the request switch 1 .
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key op ...
CAN system (type 1)
DTC/CIRCUIT DIAGNOSIS
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT
Diagnosis Procedure
1.CHECK CONNECTOR
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and
loose connecti ...