Nissan Rogue (T33) 2021-Present Service Manual: P0404 Egr Volume Control Valve

Nissan Rogue (T33) 2021-Present Service Manual / Engine :: Engine Control System / Kr15ddt :: Dtc/circuit Diagnosis / P0404 Egr Volume Control Valve

DTC Description

DTC DETECTION LOGIC

DTC

CONSULT screen terms

(Trouble diagnosis content) 		DTC detection condition
P0404 00

EGR A CONTROL

(EGR A control circuit range/performance) 		Diagnosis condition —
Signal (terminal) —
Threshold

  • ECM detects that the current sent to the EGR volume control valve motor is equal to or more than the threshold value for 2 seconds or more under the condition that the target angle of EGR volume control valve is constant.

  • ECM detects that the difference between the target angle of EGR volume control valve and actual valve angle is equal to or more than the threshold value for 5 seconds or more.
Diagnosis delay time —

POSSIBLE CAUSE

  • EGR volume control valve

  • Foreigh objects interferes with EGR volume control valve

FAIL-SAFE

Fail safe mode Nissan Ariya Vehicle behavior
Traveling control mode Engine output control

ECM reduces the engine output, according to the rise in engine speed. This reduces the Nissan Ariya vehicle speed to encourage the driver to repair malfunction.

  • Driving at 40 km/h (25 MPH) or more is possible.

NOTE:

This value is a reference value converted from engine power to Nissan Ariya vehicle speed. Actual power limitation value differs due to the malfunctioning part and driving condition.
Device fix mode

  • This mode fixes the electric IVT control actuator and the EVT control solenoid valve in the reference position.

  • A control signals is not transmitted to the EGR volume control valve and the EGR volume control is deactivated.
Combustion control mode Idle speed control Stops feedback control of idle speed and controls with specified speed.
Recovery speed control at decelerating Stops recovery speed control by the fuel cut at decelerating and controls with specified speed.
Idle neutral control Stops idle neutral control.

DTC Confirmation Procedure

CHECK DTC PRIORITY

If DTC P0404 is displayed with the following DTC, perform the trouble diagnosis for the applicable DTC.

  • P044A

  • P044E

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable.

  • DTC P044A: Refer to DTC Description.

  • DTC P044E: Refer to DTC Description.

NO>>

GO TO 2.

PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

  1. Turn ignition switch OFF and wait at least 10 seconds.

  2. Turn ignition switch ON.

  3. Turn ignition switch OFF and wait at least 10 seconds.

>>

GO TO 3.

PERFORM DTC CONFIRMATION PROCEDURE

  1. Start the engine when the following conditions are met.

    Intake air temperature 0°C (32°F) or more
    Engine coolant temperature 75°C (167°F) or more

  2. Drive the Nissan Ariya vehicle at 50 km/h (32 MPH) or more for at least 5 seconds.

  3. Check 1st trip DTC.

Is 1st trip DTC detected?

YES>>

Proceed to DTC Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: INSPECTION END

DTC Diagnosis Procedure

CHECK DTC PRIORITY

If DTC P0404 is displayed with the following DTC, perform the trouble diagnosis for the applicable DTC.

  • P044A

  • P044E

Is applicable DTC detected?

YES>>

Perform diagnosis of applicable.

  • DTC P044A: Refer to DTC Description.

  • DTC P044E: Refer to DTC Description.

NO>>

GO TO 2.

CHECK EGR VOLUME CONTROL VALVE

Check the EGR volume control valve. Refer to Component Inspection.

Is the inspection result normal?

YES>>

Check intermittent incident. Refer to Intermittent Incident.

NO>>

Replace EGR volume control valve. Refer to Removal and Installation.

    P0402 Egr System
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0402 00 EGRC-BPT VALVE (EGR A flow excessive detected) Diagnosi...
    P0407 Egr Differential Pressure Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0407 00 EGR SENSOR B (EGR sensor B circuit low) Diagnosis condi...

    Other materials:

    Dtc/circuit Diagnosis. B242a-98 Closure Motor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B242A-98 Closure motor (Closure motor) Diagnosis condition When back door closure function operate Signal (terminal) — Threshold When thermal prot ...

    U2648-87 Can Comm Circuit
    DTC Description CAN COMMUNICATIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is eq ...

    2wd. Preparation. Preparation
    Preparation Special Service Tool Tool number (TechMate No.) Tool name Description KV40104000 ( – ) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) Removing and Installing wheel hub lock nut. KV40107300 ( – ) Boot band crimping tool Installing bo ...