Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: I-LI system operation
- I-LI ON indicator
- I-LI intervention indicator
- Vehicle information display
- ProPILOT Assist switch
When the Nissan Rogue approaches a lane boundary, the steering wheel vibrates and the I-LI indicator flashes. If drifting continues, the system briefly applies gentle steering force to help guide the vehicle back toward the lane center. This assistance is momentary and does not replace driver input.
Pressing the ProPILOT Assist button turns the system ON or OFF. The vibration strength can be customized in the settings menu.
Basic information
WARNING
The Intelligent Lane Intervention system on the Nissan Rogue must be used with caution. Ignoring warnings or relying solely on the system may lead to loss of control, injury or death.
I-LI ...
How to enable/disable the I-LI system
Use steering-wheel controls
Open vehicle information display
Use the ProPILOT Assist switch for activation
To adjust I-LI settings on the Nissan Rogue:
Push the
button until “Setting ...
Other materials:
FCW system operation
Forward Collision Warning light
The FCW system is active at speeds of approximately
10 MPH (15 km/h) and above, when the
system turns on.
When FCW is turned on, FCW Indicator (white)
will turn on. FCW system is activated using the
settings menu on the information display. For
additional ...
How to enable/disable the sonar system
Steering-wheel-mounted control (left side)
Vehicle information display
The sonar system activates automatically when the ignition switch is in the ON position and the shift lever is in D (Drive) or R (Reverse).
To set up sonar system functions, follow these steps:
1. Press the
button un ...
Power steering
WARNING
If the engine is not running or is turned
off while driving, the power assist for
the steering will not work. Steering will
be harder to operate.
When the power steering warning light
illuminates with the engine running,
there will be no power a ...