Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: For system malfunction

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Starting and driving / Driver Assistance systems / For system malfunction

Warning message/Warning light:

    "Malfunction
See Owner's Manual"

Symptom: System malfunction

  • Systems to check: TSR, RAB, RCTA, AEB with Pedestrian Detection, I-FCW, LDW, I-LI, BSW, I-BSI, ICC, Steering Assist, I-DA
  • Remedy: Stop safely and restart the engine. If warnings persist, have the Nissan Rogue inspected by a dealer.

Warning message/Warning light:

    "Parking Sensor Error
See Owner's Manual"

Symptom: Parking/sonar system malfunction

  • System to check: Sonar system, RSS
  • Remedy: Stop in a safe place, restart the engine. If the error persists, servicing is required at a Nissan Rogue dealer.
    For system temporarily unavailable
    Warning message/Warning light:    "Limited driver's aidVDC setting OFF" and Illuminating Possible cause: VDC switched off System to check: AEB with Pedestrian Detectio...
    Camera, radar and sonar locations
    The Nissan Rogue uses multiple driver-assistance components placed around the vehicle, including cameras, radar sensors, and sonar sensors. These elements support features such ...

    Other materials:

    B24a4-11 Intake Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A4-11 INTAKE SENSOR (Intake sensor) Diagnosis condition Ignition switch ON Signal (Terminal) Intake sensor signal Threshold The intake sensor rec ...

    Chassis Control. Precaution. Precautions
    Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and ...

    Magnetic Clutch
    Component Function Check CHECK MAGNETIC CLUTCH OPERATION CONSULT Select “HVAC TEST” in “Active test” mode of “HVAC”. Touch “MODE 1”. With operating the test item, check magnetic clutch operation by listening and viewing. Does it operate normally? YES>> ...