Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: For system temporarily unavailable

Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide / Starting and driving / Driver Assistance systems / For system temporarily unavailable

Warning message/Warning light:

   "Limited driver's aid
VDC setting OFF" and Illuminating

  • Possible cause: VDC switched off
  • System to check: AEB with Pedestrian Detection
  • Remedy: Turn VDC back on.

Warning message/Warning light:

   "Driving Aids temporarily limited" and Illuminating

  • Possible cause: Abnormal system check end or vehicle towed
  • System affected: AEB with Pedestrian Detection
  • Remedy: System will resume automatically once conditions normalize.

Warning message/Warning light:

   "Unavailable Slippery Road"

  • Possible cause: Reduced traction
  • System affected: I-LI, I-BSI, ICC

Warning message/Warning light:

   "Currently Unavailable"

  • Possible cause: VDC turned off
  • System to check: I-LI, I-BSI, ICC
  • Remedy: Turn VDC on.

Warning message/Warning light:

    "Currently Unavailable"

  • Possible cause: SNOW or OFF-ROAD mode active (AWD models)
  • System to check: I-LI, I-BSI, ICC

Warning message/Warning light:

   "Currently Unavailable"

  • Remedy: Switch to a mode other than SNOW or OFF-ROAD.
    Common troubleshooting guide
    Basic information Several Driver Assistance features in the Nissan Rogue rely on shared hardware such as cameras and radar units. When warning messages appear or indicator light...
    For system malfunction
    Warning message/Warning light:     "MalfunctionSee Owner's Manual" Symptom: System malfunction Systems to check: TSR, RAB, RCTA, AEB with Pedestrian Detection, I-...

    Other materials:

    C10b7-16 Parking Brake Power Supply
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition C10B7 16 Parking brake power supply (Parking brake power supply) Diagnosis condition When ignition switch ON. Signal (terminal) Ignition power supply ...

    Drivetrain Can Communication 2 Circuit
    Diagnosis Procedure CHECK NETWORK DIAGNOSIS Check the "Network diagnosis" results from CONSULT to see that the diagnostic CAN communication circuit have no malfunction. Are the diagnostic CAN communication circuit normal? YES>> GO TO 2. NO>> Check and repair diagnostic CAN commu ...

    Symptom Diagnosis. Intelligent Key System Symptoms
    Diagnosis Procedure NOTE: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. SYMPTOM TABLE 1 (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) No. Door lock operation (remote keyless entry) Door lock operation (request swit ...