Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Rear Power Window Switch Rh

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Power Window Control System / Dtc/circuit Diagnosis :: Rear Power Window Switch Rh

Component Function Check

CHECK FUNCTION

Check rear power window motor RH operation with rear power window switch RH and power window main switch (rear RH switch).

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK REAR POWER WINDOW SWITCH RH CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect power window main switch connector, rear power window switch LH connector and rear power window switch RH connector.

  3. Check continuity between power window main switch harness connector and rear power window switch RH harness connector.

    Power window main switch Rear power window switch RH Continuity
    Connector Terminal Connector Terminal

    D6*1

    D27*2    		 12 D304 3 Yes
    16 4
    11 5

    *1: With automatic driver positioner

    *2: Without automatic driver positioner

  4. Check continuity between rear power window switch RH harness connector and ground.

    Rear power window switch RH (–) Continuity
    Connector Terminal
    D304 3 Ground No
    4
    5

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness.

CHECK REAR POWER WINDOW SWITCH RH

Check rear power window switch RH.

Refer to Component Inspection.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace rear power window switch RH. Refer to Removal and Installation.

Component Inspection

CHECK REAR POWER WINDOW SWITCH RH 1

  1. Ignition switch OFF.

  2. Disconnect rear power window switch RH connector.

  3. Check continuity between rear power window switch RH terminals.

    Rear power window switch RH Continuity
    Terminal
    1 6 No
    7 Yes
    2 6 No
    7 Yes

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace rear power window switch RH. Refer to Removal and Installation.

CHECK REAR POWER WINDOW SWITCH RH 2

Check voltage rear power window switch RH terminals under the following conditions:

Rear power window switch RH Condition

Voltage

(Approx.)
Terminal
(+) (–)
1 Ground 12 V direct current supply between terminals 6 (+) and 3 (−). NEUTRAL 0 V
DOWN Battery voltage
2 Ground 12 V direct current supply between terminals 6 (+) and 3 (−). NEUTRAL 0 V
UP Battery voltage

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Replace rear power window switch RH. Refer to Removal and Installation.

CHECK REAR POWER WINDOW SWITCH RH 3

Check voltage rear power window switch RH terminals under the following conditions:

Rear power window switch RH Condition

Voltage

(Approx.)
Terminal
(+) (–)
1 Ground 12 V direct current supply between terminals 6 (+) and 5(−). Battery voltage
No current supply 0 V
2 Ground 12 V direct current supply between terminals 6 (+) and 4(−). Battery voltage
No current supply 0 V

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace rear power window switch RH. Refer to Removal and Installation.

    Dtc/circuit Diagnosis. Rear Power Window Switch Lh
    Component Function Check CHECK FUNCTION Check rear power window motor LH operation with rear power window switch LH and power window main switch (rear LH switch). Is the inspect...
    Dtc/circuit Diagnosis. Power Window Motor
    Front (passenger Side) Component Function Check CHECK FUNCTION Check front power window motor (passenger side) operation with power window main switch (passenger side switch) or...

    Other materials:

    Dtc/circuit Diagnosis. U2141-87 Can Comm Circuit
    DTC Description DESCRIPTIONCAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Ariya vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Ariya vehicle is equipped ...

    Power Socket. Removal and Installation. Power Socket
    Power Socket Console Power Socket Removal and Installation REMOVALRemove switch panel. Refer to Removal and Installation. Press the power socket fixing pawls from the back of the switch panel to remove the power socket. : Pawl INSTALLATIONNote the following, and install in the reve ...

    Steering Switch Signal B Circuit
    Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Ignition switch ON. Select “Steering switch input” in “Data monitor” mode of “M&A”. Check that the function operates normally according to the following conditions: Condition Value CONTRO ...