Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Power Window Motor

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Power Window Control System / Dtc/circuit Diagnosis :: Power Window Motor

Front (passenger Side)

Component Function Check

CHECK FUNCTION

Check front power window motor (passenger side) operation with power window main switch (passenger side switch) or front power window switch (passenger side).

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) INPUT SIGNAL

  1. Ignition switch OFF.

  2. Disconnect front power window motor (passenger side) connector.

  3. Ignition switch ON.

  4. Check voltage between front power window motor (passenger side) harness connector and ground.

    (+) (−) Condition

    Voltage

    (Approx.)
    Front power window motor (passenger side)
    Connector Terminal
    D105 1 Ground Front power window switch (passenger side) UP Battery voltage
    DOWN 0 V
    2 UP 0 V
    DOWN Battery voltage

Is the inspection result normal?

YES>>

Replace front power window motor (passenger side). Refer to Disassembly and Assembly.

NO>>

GO TO 2.

CHECK FRONT POWER WINDOW MOTOR (PASSENGER SIDE) CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect front power window switch (passenger side) connector.

  3. Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.

    Front power window switch (passenger side) Front power window motor (passenger side) Continuity
    Connector Terminal Connector Terminal
    D112 1 D105 2 Yes
    2 1

  4. Check continuity between front power window switch (passenger side) harness connector and ground.

    Front power window switch (passenger side) (–) Continuity
    Connector Terminal
    D112 1 Ground No
    2

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

Rear Lh

Component Function Check

CHECK FUNCTION

Check rear power window motor LH operation with power window main switch (rear LH switch) or rear power window switch LH.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK REAR POWER WINDOW MOTOR LH INPUT SIGNAL

  1. Ignition switch OFF.

  2. Disconnect rear power window motor LH connector.

  3. Ignition switch ON.

  4. Check voltage between rear power window motor LH harness connector and ground.

    (+) (−) Condition

    Voltage

    (Approx.)
    Rear power window motor LH
    Connector Terminal
    D205 1 Ground Rear power window switch LH UP Battery voltage
    DOWN 0 V
    2 UP 0 V
    DOWN Battery voltage

Is the inspection result normal?

YES>>

Replace rear power window motor LH. Refer to Disassembly and Assembly.

NO>>

GO TO 2.

CHECK REAR POWER WINDOW MOTOR LH CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect rear power window switch LH connector.

  3. Check continuity between rear power window switch LH harness connector and rear power window motor LH harness connector.

    Rear power window switch LH Rear power window motor LH Continuity
    Connector Terminal Connector Terminal
    D204 1 D205 2 Yes
    2 1

  4. Check continuity between rear power window switch LH connector and ground.

    Rear power window switch LH — Continuity
    Connector Terminal
    D204 1 Ground No
    2

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

Rear Rh

Component Function Check

CHECK FUNCTION

Check rear power window motor RH operation with power window main switch (rear RH switch) or rear power window switch RH.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL

  1. Ignition switch OFF.

  2. Disconnect rear power window motor RH connector.

  3. Ignition switch ON.

  4. Check voltage between rear power window motor RH harness connector and ground.

    (+) (−) Condition

    Voltage

    (Approx.)
    Rear power window motor RH
    Connector Terminal
    D305 1 Ground Rear power window switch RH UP Battery voltage
    DOWN 0 V
    2 UP 0 V
    DOWN Battery voltage

Is the inspection result normal?

YES>>

Replace rear power window motor RH. Refer to Disassembly and Assembly.

NO>>

GO TO 2.

CHECK REAR POWER WINDOW MOTOR RH CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect rear power window switch RH connector.

  3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

    Rear power window switch RH Rear power window motor RH Continuity
    Connector Terminal Connector Terminal
    D304 1 D305 2 Yes
    2 1

  4. Check continuity between rear power window switch RH harness connector and ground.

    Rear power window switch RH (–) Continuity
    Connector Terminal
    D304 1 Ground No
    2

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

    Dtc/circuit Diagnosis. Front Power Window Switch Lh
    Component Function Check CHECK FUNCTION Check front power window motor (passenger side) operation with front power window switch (passenger side) and power window main switch (p...
    Dtc/circuit Diagnosis. Power Window Relay
    Component Inspection CHECK POWER WINDOW RELAY Ignition switch OFF. Remove power window relay. Check continuity between power window relay terminals. Power window relay Condition...

    Other materials:

    B20c7-11 A/c Clutch
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B20C7–11 A/C clutch (A/C clutch) [CIRCUIT SHORT TO GROUND] Diagnosis condition When A/C switch is ON Signal (Terminal) Magnetic clutch ON signal T ...

    B2267-29 Engine Speed
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2267-29 TACHO METER (Tacho meter) Diagnosis condition When ignition switch is ON. Signal (terminal) Engine speed signal Threshold ECM continuously t ...

    Wl Chg Branch Line Circuit
    Diagnosis Procedure CHECK CONNECTOR Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). Wireless charger unit Harness connec ...