Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Rear Power Window Switch Lh

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Power Window Control System / Dtc/circuit Diagnosis :: Rear Power Window Switch Lh

Component Function Check

CHECK FUNCTION

Check rear power window motor LH operation with rear power window switch LH and power window main switch (rear LH switch).

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK REAR POWER WINDOW SWITCH LH CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect power window main switch connector, rear power window switch LH connector and rear power window switch RH connector.

  3. Check continuity between power window main switch harness connector and rear power window switch LH harness connector.

    Power window main switch Rear power window switch LH Continuity
    Connector Terminal Connector Terminal

    D6*1

    D27*2    		 12 D204 3 Yes
    24 4
    23 5

    *1: With automatic driver positioner

    *2: Without automatic driver positioner

  4. Check continuity between rear power window switch LH harness connector and ground.

    Rear power window switch LH (–) Continuity
    Connector Terminal
    D204 3 Ground No
    4
    5

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness.

CHECK REAR POWER WINDOW SWITCH LH

Check rear power window switch LH.

Refer to Component Inspection.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace rear power window switch LH. Refer to Removal and Installation.

Component Inspection

CHECK REAR POWER WINDOW SWITCH LH 1

  1. Ignition switch OFF.

  2. Disconnect rear power window switch LH connector.

  3. Check continuity between rear power window switch LH terminals.

    Rear power window switch LH Continuity
    Terminal
    1 6 No
    7 Yes
    2 6 No
    7 Yes

Is the inspection result normal?

YES>>

GO TO 2

NO>>

Replace rear power window switch LH. Refer to Removal and Installation.

CHECK REAR POWER WINDOW SWITCH LH 2

Check voltage rear power window switch LH terminals under the following conditions:

Rear power window switch LH Condition

Voltage

(Approx.)
Terminal
(+) (–)
1 Ground 12 V direct current supply between terminals 6 (+) and 3 (−). NEUTRAL 0 V
DOWN Battery voltage
2 Ground 12 V direct current supply between terminals 6 (+) and 3 (−). NEUTRAL 0 V
UP Battery voltage

Is the inspection result normal?

YES>>

GO TO 3

NO>>

Replace rear power window switch LH. Refer to Removal and Installation.

CHECK REAR POWER WINDOW SWITCH LH 3

Check voltage rear power window switch LH terminals under the following conditions:

Rear power window switch LH Condition

Voltage

(Approx.)
Terminal
(+) (–)
1 Ground 12 V direct current supply between terminals 6 (+) and 5(−). Battery voltage
No current supply 0 V
2 Ground 12 V direct current supply between terminals 6 (+) and 4(−). Battery voltage
No current supply 0 V

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace rear power window switch LH. Refer to Removal and Installation.

    Dtc/circuit Diagnosis. Front Power Window Switch Lh
    Component Function Check CHECK FUNCTION Check front power window motor (passenger side) operation with front power window switch (passenger side) and power window main switch (p...
    Dtc/circuit Diagnosis. Rear Power Window Switch Rh
    Component Function Check CHECK FUNCTION Check rear power window motor RH operation with rear power window switch RH and power window main switch (rear RH switch). Is the inspect...

    Other materials:

    Heated steering wheel
    Example Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light A will illuminate once the system is active. If the steering wheel surface temperature is below 86–104ºF (30–40ºC), the system will automatically heat the wheel and cycle o ...

    P2135 Tp Sensor
    DTC Description DTC DETECTION LOGICNOTE: If DTC P2135 is displayed with DTC P06B0, first perform the trouble diagnosis for DTC P06B0. Refer to DTC Description. DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P2135 00 TP SENSOR-B1 (Throttle/Pedal ...

    Periodic Maintenance
    Periodic Maintenance The following tables show the normal maintenance schedule. Depending upon weather and atmospheric conditions, varying road surfaces, individual driving habits and Nissan Ariya vehicle usage, additional or more frequent maintenance may be required.Periodic maintenance beyo ...