Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Power Window Main Switch

Nissan Rogue (T33) 2021-Present Service Manual / Body Exterior, Doors, Roof & Vehicle Security :: Power Window Control System / Dtc/circuit Diagnosis :: Power Window Main Switch

Component Function Check

CHECK POWER WINDOW MAIN SWITCH FUNCTION

Check front power window motor (driver side) operation using power window main switch.

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK POWER WINDOW MAIN SWITCH CIRCUIT

  1. Ignition switch OFF, and then wait for 3 minutes with driver door open.

    NOTE:

    • Even after ignition switch is OFF, power is supplied to accessories for a certain amount of timer by the AUTO ACC function.

    • When Nissan Ariya vehicle is operate while on standby, power may be supplied to accessories.

  2. Disconnect front power window motor (driver side) connector and power window main switch connector.

  3. Check continuity between front power window motor (driver side) harness connector and ground.

    Front power window motor (driver side) (–) Continuity
    Connector Terminal
    D10 1 Ground No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

    Dtc/circuit Diagnosis. Power Supply and Ground Circuit
    Power Window Main Switch Diagnosis Procedure CHECK FUSE Ignition switch OFF, and then wait for 3 minutes with driver door open. NOTE: Even after ignition switch is OFF, power is...
    Dtc/circuit Diagnosis. Front Power Window Switch Lh
    Component Function Check CHECK FUNCTION Check front power window motor (passenger side) operation with front power window switch (passenger side) and power window main switch (p...

    Other materials:

    B2267-29 Engine Speed
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detected condition B2267-29 TACHO METER (Tacho meter) Diagnosis condition When ignition switch is ON. Signal (terminal) Engine speed signal Threshold ECM continuously t ...

    Programmes d'entretien
    Informations de base Afin de garantir une conduite fluide, sûre et économique sur la durée, NISSAN met à disposition deux programmes d’entretien distincts pour le Nissan Rogue, à sélectionner en fonction des conditions réelles d’utilisation du véhicule. Ces programmes d’entretien ...

    P0456 Evap Control System
    DTC Description DTC DETECTION LOGICThis diagnosis detects leaks in the EVAP line between fuel tank and EVAP canister purge volume control solenoid valve, using the negative pressure caused by decrease of fuel temperature in the fuel tank after turning ignition switch OFF.If ECM judges there a ...