Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: Front Wiper Motor Ground Circuit

Nissan Rogue (T33) 2021-Present Service Manual / Driver Controls :: Wiper & Washer / Dtc/circuit Diagnosis :: Front Wiper Motor Ground Circuit

Diagnosis Procedure

CHECK FRONT WIPER MOTOR GROUND CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect front wiper motor connector.

  3. Check continuity between front wiper motor harness connector and ground.

    Front wiper motor (—) Continuity
    Connector Terminal
    E20 2 Ground Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness.

    Dtc/circuit Diagnosis. Front Wiper Auto Stop Signal Circuit
    Component Function Check CHECK FRONT WIPER STOP POSITION SIGNAL CONSULT Select “FR WIPER STOP POSITION” in “Data monitor” mode of “IPDM E/R”. Operate the front wiper...
    Dtc/circuit Diagnosis. Rear Wiper Motor Circuit
    Component Function Check CHECK REAR WIPER OPERATION CONSULT Select “Rear wiper” in "Active test" mode of "BCM". With operating the test item, check rear wiper operation. On ...

    Other materials:

    B24a0-49 A/c Auto Amp.
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B24A0-49 A/C AUTO AMP. (Air conditioning automatic amplifier) Diagnosis condition Ignition switch ON Signal (Terminal) — Threshold A malfunction i ...

    Basic Inspection. Diagnosis and Repair Work Flow
    Work Flow OVERALL SEQUENCEDETAILED FLOWGET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurs). Check operation condition of the function that is malfunctioning. >> G ...

    Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
    Work Flow CUSTOMER INTERVIEWInterview the customer if possible, to determine the conditions that exist when the noise occurs. Use the Diagnostic Worksheet during the interview to document the facts and conditions when the noise occurs and any of customer's comments. Refer to Diagnostic Work ...