Nissan Rogue (T33) 2021-Present Service Manual: Dtc/circuit Diagnosis :: B2909-11 Slope Sensor

Nissan Rogue (T33) 2021-Present Service Manual / Body Interior :: Automatic Drive Positioner / Dtc/circuit Diagnosis :: B2909-11 Slope Sensor

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen items

(Trouble diagnosis content) 		DTC detection condition
B2909-11 Slope Sensor Diagnosis condition The Thigh Support Sensor signal is shorted to ground
Signal (terminal) Thigh Support Motor (terminal #5)
Threshold 0.00 - 0.352 V
Diagnosis delay time 100 mili- seconds or more

POSSIBLE CAUSE

  • LH Thigh Support Motor

  • Driver seat control unit

  • Harness or connectors

FAIL-SAFE

Stop automatic drive position function.

DTC CONFIRMATION PROCEDURE

PERFORM DTC CONFIRMATION PROCEDURE

CONSULT

  1. Ignition switch ON and wait for 20 seconds or more.

  2. Check “Self diagnosis result” mode of “DRIVER SEAT”.

Is DTC detected?

YES>>

Refer to Diagnosis Procedure.

NO-1>>

To check malfunction symptom before repair: Refer to Intermittent Incident.

NO-2>>

Confirmation after repair: Inspection End.

Diagnosis Procedure

CHECK THIGH SUPPORT MOTOR SENSOR SIGNAL

  1. Ignition switch OFF.

  2. Disconnect driver seat control unit and LH thigh support motor.

  3. Check continuity between driver seat control unit harness connector and ground.

(+) (-) Continuity
Driver seat control unit
Connector Terminal
B213 15 Ground Yes

Is the inspection result normal?

YES>>

Connect driver seat control unit and LH thigh support motor. Refer to Component Function Check.

NO>>

Repair the harness or connector.

    Dtc/circuit Diagnosis. B2908-31 Slide Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition B2908-31 Slide Sensor Diagnosis condition When the ignition ...
    Dtc/circuit Diagnosis. B2909-12 Slope Sensor
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC detection condition B2909-12 Slope Sensor Diagnosis condition When the ignition ...

    Other materials:

    Dtc/circuit Diagnosis. Thigh Support Motor
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Thigh support motor” in “Active test” mode of “DRIVER SEAT”. Check thigh support motor LH operation. Test item Operation Thigh support motor Up Thigh support Upward Down ...

    Preparation
    Special Service Tools The actual shapes of TechMate tools may differ from those of special service tools illustrated here. Tool number (TechMate No.) Tool name Description (NI-39570) Chassis ear Locates the noise (NI-50397) Squeak and Rattle Kit Repairs the cause o ...

    Steering Switch Signal B Circuit
    Component Function Check CHECK COMBINATION METER INPUT SIGNAL CONSULT Ignition switch ON. Select “Steering switch input” in “Data monitor” mode of “M&A”. Check that the function operates normally according to the following conditions: Condition Value CONTRO ...