Nissan Rogue (T33) 2021-Present Service Manual: Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
|
Tool number (TechMate No.) Tool name | Description | |
|---|---|---|
|
(NI-39570) Chassis ear |
|
Locates the noise |
|
(NI-50397) Squeak and Rattle Kit |
|
Repairs the cause of noise |
CommercialServiceTools
| Tool name | Description | |
|---|---|---|
| Engine ear |
|
Locates the noise |
| Power tool |
|
Loosening bolts, nuts, and screws |
Always Replace with New Parts
| Never Reuse These Parts | Part Code | For additional information: |
|---|---|---|
| HOOD HINGE SEAL | - | HOOD EXPLODED VIEW |
| SCR-F HD,W/WASH | 80053D | FRONT DOOR EXPLODED VIEW |
| SCR-F HD,W/WASH | 80053D | REAR DOOR EXPLODED VIEW |
| SCR-F HD,W/WASH | 90050D | BACK DOOR EXPLODED VIEW |
| SCR-MACH,SPL | 80050D | FRONT DOOR LOCK EXPLODED VIEW |
| SCR-MACH,SPL | 82050D | REAR DOOR LOCK EXPLODED VIEW |
| BASE ASSY - FUEL FILLER | 78120+A | FUEL FILLER LID OPENER EXPLODED VIEW |
Other materials:
P2c91 Crankcase Ventilation System
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P2C91
00
Crankcase Ventilation System - Hose "B" Disconnected
(Crankcase Pressure Sensor "A" Circuit Low)
Diagnosis condition
Ignition switch ON
Inta ...
Removal and Installation. Inside Key Antenna
Japan Production Models
Removal and Installation
REMOVALRemove luggage rear plate. Refer to Removal and Installation.
Remove inside key antenna fixing clips , and then remove inside key antenna .
INSTALLATIONNote the following items, and then install in the reverse order of removal.CAUTION:
N ...
Repair Information. Preparation
Repairing Material
Foam Repair
During factory body assembly, foam insulators are installed in
certain body panels and locations around the Nissan Ariya vehicle. Use
the following procedure(s) to replace any factory-installed foam
insulators.URETHANE FOAM APPLICATIONSUse commercially availabl ...




