Nissan Rogue Service Manual: DTC/circuit diagnosis

Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM  Get detailed information from the customer about the symptom (the condition an ...

Interior room lamp power supply circuit

Description Provides the interior room lamp power supply. Also cuts the power supply when the interior room lamp battery saver is activating. Component Function Check 1.CHECK INTERIOR ROOM LAMP ...

Other materials:

P0453 EVAP control system pressure sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0453 EVAP SYS PRES SEN (Evaporative emission system pressure sensor/switch high) An excessively high voltage from the sensor is sent to ECM. ...

The liftgate open warning continues displaying, or does not display
Description The liftgate open warning is displayed continuously even though the liftgate is closed.  The liftgate open warning is not displayed even though the liftgate is open. Diagnosis Procedure 1.CHECK BCM INPUT SIGNAL Check the BCM input signal. Refer to DLK-149, "Com ...

Additional service when replacing ECM
Description When replacing ECM, the following procedure must be performed. (For details, refer to EC-136, "Work Procedure".) PROGRAMMING OPERATION NOTE: After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform t ...