Nissan Rogue (T33) 2021-Present Service Manual: Cvt: Ge0f14a :: Wiring Diagram

Cvt Control System

Wiring Diagram

Refer to Wiring Diagram.

Electric Shift Control System

Wiring Diagram

Refer to Wiring Diagram.

    Electric Shift Control Module
    Reference Value CONSULT DATA MONITOR STANDARD VALUENOTE: The following table includes information (items) inapplicable to this Nissan Ariya vehicle. For information (items) appl...
    Cvt: Ge0f14a. Basic Inspection
    Diagnosis and Repair Work Flow Work Flow NOTE: “DTC” includes DTC at the 1st trip. OBTAIN INFORMATION ABOUT SYMPTOM Refer to Diagnostic Work Sheet and interview the customer...

    Other materials:

    P044b Egr Volume Control Valve Position Sensor
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P044B 00 EGR SENSOR C (EGR Sensor "C" Circuit Range/Performance) Diagnosis condition After warming up, switch OFF the ignition every time the engine is stopped ...

    Periodic Maintenance. Wheel Alignment
    Inspection DESCRIPTIONCAUTION: The adjustment mechanisms of camber, caster, and kingpin inclination angles are not included. If camber, caster, or kingpin inclination angle exceeds the standard value, check front suspension parts for wear and damage. Replace suspect parts if a malfunc ...

    Dtc/circuit Diagnosis. Back Door Switch
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Back door/trunk lid switch” in “Data monitor” mode of "BCM [TRUNK]". Check that the function operates normally according to the following conditions. Monitor item Condition Status Back doo ...