Nissan Rogue (T33) 2021-Present Service Manual: C1f8b-62 Hd Map Module
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F8B | 62 |
HD map module circuit (HD map module circuit) |
Diagnosis condition | When engine is running |
| Signal (terminal) | Ethernet communication signal | |||
| Threshold | Receive system error signal from HD map module | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
HD map module circuit
-
ADAS control unit 2 malfunction
FAIL-SAFE
The following system are cancelled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F8B-62” is displayed with DTC “U19C5-87” or “U19C7-87”, first perform the confirmation procedure the trouble diagnosis for DTC “U19C5-87” or “U19C7-87”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable.
-
U19C5-87: Refer to DTC Diagnosis Procedure.
-
U19C7-87: Refer to DTC Diagnosis Procedure.
GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F8B-62” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F8B-62” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F8B-62” is displayed with DTC “U19C5-87” or “U19C7-87”, first perform the confirmation procedure the trouble diagnosis for DTC “U19C5-87” or “U19C7-87”.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable.
-
U19C5-87: Refer to DTC Diagnosis Procedure.
-
U19C7-87: Refer to DTC Diagnosis Procedure.
GO TO 2.
CHECK HD MAP MODULE SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “HD MAP”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
Removal and Installation. Spiral Cable
Exploded View
Combination switch
Spiral cable
Steering angle sensor
: Pawl
: Always replace after every disassembly.
Removal and Installation
WARNING:
Always observe the following items for preventing accidental activation.
Never use air tools or electric too ...
Mirrors
Inside mirror
Basic information
Adjust the angle of the inside mirror to
the desired position for a clear rearward view in your Nissan Rogue.
Manual anti-glare type (if so
equipped)
The night position 1 will reduce glare
from the headlights of vehicles behind
you at night.
Use the day positio ...
Removal and Installation. Brake Pedal
Without Propilot Assist 2.1
Exploded View
Brake pedal assembly
Snap pin
Brake pedal pad
Stop lamp switch
Clevis pin
: N·m (kg-m, ft-lb)
: Apply multi-purpose grease.
: Always replace after every disassem ...