Nissan Rogue (T33) 2021-Present Service Manual: C1f8b-47 Hd Map Module
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F8B | 47 |
HD map module circuit (HD map module circuit) |
Diagnosis condition | When engine is running |
| Signal (terminal) | Ethernet communication signal | |||
| Threshold | HD map license contract is not signed, or HD map license contract is not completed. | |||
| Diagnosis delay time | 2 seconds or more | |||
POSSIBLE CAUSE
HD map license contract is not signed, or high precision map license contract is not completed.
FAIL-SAFE
The following system are cancelled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK HD MAP LICENSE CONTRACTS
Check if HD map license contract is signed and its contract is completed.
>>
Inform the customer of the HD map license contract. Explain to the customer, if the customer does not sign it, the following functions are restricted, and when using ProPILOT Assist 2.1, the message of “Some steering wheel support functions are limited (HD map license expired)” is displayed and DTC “C1F8B-47” is detected.
-
Some steering wheel support functions of ProPILOT Assist 2.1
DTC Diagnosis Procedure
CHECK HD MAP LICENSE CONTRACTS
Check if HD map license contract is signed and its contract is completed.
>>
Inform the customer of the HD map license contract. Explain to the customer, if the customer does not sign it, the following functions are restricted, and when using ProPILOT Assist 2.1, the message of “Some steering wheel support functions are limited (HD map license expired)” is displayed and DTC “C1F8B-47” is detected.
-
Some steering wheel support functions of ProPILOT Assist 2.1
Other materials:
Dtc/circuit Diagnosis. Lin Communication Circuit
Moonroof Motor Assembly
Diagnosis Procedure
CHECK LIN COMMUNICATION SIGNAL
Ignition switch OFF.
Disconnect moonroof motor assembly harness connector.
Ignition switch ON.
Check signal between moonroof motor assembly harness connector and ground using an oscilloscope.
(+) (— ...
Drive Belt Auto Tensioner and Idler Pulley
With Idle Start/stop System
Exploded View
1.
Drive belt auto-tensioner
—
—
—
—
Removal and Installation
REMOVALRemove the wheel and tire (front RH). Refer to Removal & Installation.
Remove the splash guard (front RH). Refer to Exploded View.
Remove the fr ...
Removal and Installation. Front Door
Exploded View
Front door panel
Grommet
Front door striker
TORX bolt
Clip
Front outer pad
Front door check link
Front door hinge (lower)
Front door hinge (upper)
Front door weather-strip
: Clip
: Alwa ...
