Nissan Rogue (T33) 2021-Present Service Manual: C1f89-97 Side Radar Rear Lh
DTC Description
DTC DETECTION LOGIC
| DTC |
CONSULT screen terms (Trouble diagnosis content) | DTC detection condition | ||
|---|---|---|---|---|
| C1F89 | 97 |
Side radar rear LH (Side radar rear left hand) |
Diagnosis condition | When engine is running |
| Signal (terminal) | CAN communication signal | |||
| Threshold | ADAS control unit 2 detects an error signal that is received from side radar rear LH | |||
| Diagnosis delay time | 1 second or less | |||
POSSIBLE CAUSE
-
Side radar rear LH
-
ADAS control unit 2
FAIL-SAFE
The following system are cancelled.
-
Lane keep function*
-
Lane change support function
-
Overtaking support function
-
Route driving support function
*: ProPILOT Assist 2.1 display is blue
CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
If DTC “C1F89-97” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F89-97” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F89-97” detected as the current malfunction?
YES>>Refer to DTC Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
DTC Diagnosis Procedure
CHECK DTC PRIORITY
If DTC “C1F89-97” is displayed with Network-DTC, first diagnose the Network-DTC.
Is applicable DTC detected?
YES>>Perform diagnosis of applicable. Refer to DTC Index.
NO>>GO TO 2.
CHECK SIDE RADAR REAR LH SELF-DIAGNOSIS RESULTS
Check if any DTC is detected in “Self Diagnostic Result” of “Side radar (Rear left)”.
Is any DTC detected?
YES>>Perform diagnosis on the detected DTC and repair or replace the malfunctioning parts. Refer to DTC Index.
NO>>Replace the ADAS control unit 2. Refer to Removal and Installation.
Other materials:
Mixture Ratio Self-Learning Value Clear
Description
This describes how to erase the mixture ratio self-learning value.
For the actual procedure, follow the instructions in “Diagnosis
Procedure”. (For details, refer to Work Procedure.)
Work Procedure
START
With CONSULT
Start engine and warm it up to normal operating tempe ...
Dtc/circuit Diagnosis. Power Window Motor
Front (passenger Side)
Component Function Check
CHECK FUNCTION
Check front power window motor (passenger side) operation with power
window main switch (passenger side switch) or front power window switch
(passenger side).
Is the inspection result normal?
YES>>
Inspection End.
NO> ...
P0127 Iat Sensor
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
P0127
00
IAT SENSOR-B1
(Intake air temperature too high)
Diagnosis condition
—
Signal (terminal)
Intake air temperature sensor signal
Threshold ...
