Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Basic information

WARNING

Failure to follow the warnings and instructions for proper use of the AEB with Pedestrian Detection system on the Nissan Rogue could result in serious injury or death.

  • The AEB with Pedestrian Detection system is an assistive feature, not a substitute for the driver's attention or safe driving behavior. It cannot prevent collisions caused by inattention or unsafe driving practices.
  • The system may not function in all traffic, weather, road, or visibility conditions.

The AEB with Pedestrian Detection system on the Nissan Rogue can help when there is a risk of a forward collision with:

  • a vehicle traveling ahead in the same lane
  • a pedestrian moving into the vehicle’s path
  • a cyclist ahead in the travelling lane

Intersection Assist can provide additional support in situations such as:

  • Turning left or right across the path of an oncoming vehicle
  • Turning left or right when a pedestrian ahead is expected to enter the vehicle’s path

Nissan Rogue. Automatic Emergency Braking (AEB) with Pedestrian Detection system

The AEB with Pedestrian Detection system uses a forward radar sensor B located at the front of the Nissan Rogue to measure distance to the vehicle ahead.

For detecting pedestrians and cyclists, the AEB system also relies on a camera A mounted behind the windshield, working together with the radar to provide more accurate detection.

    Automatic Emergency Braking (AEB) with Pedestrian Detection system
    AEB with Pedestrian Detection system operation
    AEB emergency warning indicator Vehicle ahead detection indicator (on the vehicle information display) AEB system OFF warning light (on the meter panel) Steering-wheel-mounted c...

    Other materials:

    U1ca1-08 Lin Communication 2
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition U1CA1-08 LIN communication 2 (Local interconnect network communication 2) Diagnosis condition Ignition switch ON Signal (Terminal) LIN (A/C switch assembly) ...

    Removal and Installation. Front Door Lock
    Exploded View 1. Front door outside handle escutcheon 2. Rear gasket 3. Front door outside handle bracket 4. TORX bolt 5. Key rod (If equipped) 6. Key rod holder (If equipped) 7. TORX bolt 8. Front door lock assembly 9. Front door outside ...

    Information Display (combination Meter)
    Remote Engine Start Information DESIGN/PURPOSEInformation display informs the driver that the engine can be started. Symbol Message Push brake and start switch to drive SYNCHRONIZATION WITH MASTER WARNING LAMPNo applicableSYSTEM DIAGRAMSIGNAL PATH BCM transmits meter display signal ...