Nissan Rogue (T33) 2021-Present Service Manual: B2231-17 Battery Voltage
DTC Description
DTC DETECTION LOGIC
| DTC No. |
CONSULT screen terms (Trouble diagnosis content) | DTC detected condition | ||
|---|---|---|---|---|
| B2231-17 |
Battery voltage (Battery voltage) |
Diagnosis condition | When ignition switch is ON. | |
| Signal (terminal) | Battery power supply | |||
| Threshold | 16 V or more | |||
| Diagnosis delay time | — | |||
POSSIBLE CAUSE
Battery voltage is too high.
FAIL-SAFE
—
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
-
Ignition switch ON and wait for 2 seconds or more.
-
Select “Self diagnosis result” mode of “M&A”.
-
Check DTC.
Is DTC B2231-17 detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair:Inspection End.
Diagnosis Procedure
CHECK BATTERY
Check battery. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the malfunctioning parts.
CHECK CHARGING SYSTEM
Check charging system condition. Refer to Work Flow (With EXP-800 NI or GR8-1200 NI) or Work Flow (Without EXP-800 NI or GR8-1200 NI).
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK COMBINATION METER POWER SUPPLY CIRCUIT
Check combination meter power supply circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace combination meter. Refer to Removal and Installation.
NO>>Repair or replace the malfunctioning parts.
Other materials:
Drive Pinion
Kr15ddt
Exploded View
Drive pinion lock nut
Companion flange
Dust shield
Drive pinion oil seal
Pinion bearing assembly
O-ring
Drive pinion adjusting shim
Drive pinion
O-ring
Transfer case oil seal
Dowel pin
Plug
Gasket
T ...
Preparation
Special Service Tools
The actual shapes of TechMate tools may differ from those of special service tools illustrated here.
Tool number
(TechMate No.)
Tool name Description
(NI-39570)
Chassis ear
Locates the noise
(NI-50397)
Squeak and Rattle Kit
Repairs the cause o ...
Cvt: Ge0f14a. Symptom Diagnosis
Cvt Control System
Symptom Table
The diagnosis item number indicates the order of check. Start checking in the order from 1.
Perform diagnoses of symptom table 1 before symptom table 2.
Symptom Table 1 Diagnostic item Reference Symptom
Shift Shock Slips/Will Not Engage Other
...