Nissan Rogue (T33) 2021-Present Service Manual: Cvt: Ge0f14a :: Symptom Diagnosis

Nissan Rogue (T33) 2021-Present Service Manual / Transmission & Driveline :: Transaxle & Transmission / Cvt: Ge0f14a :: Symptom Diagnosis

Cvt Control System

Symptom Table

  • The diagnosis item number indicates the order of check. Start checking in the order from 1.

  • Perform diagnoses of symptom table 1 before symptom table 2.

Symptom Table 1

Diagnostic item Reference Symptom
Shift Shock Slips/Will Not Engage Other
Large shock (N→ D position) Large shock (N→ R position) Shock is too large for lock-up. Nissan Ariya Vehicle cannot be started from D position. Vehicle cannot be started from R position. Does not lock-up. Does not hold lock-up condition. Lock-up is not released. When shifted to D position, acceleration is extremely poor. When shifted to R position, acceleration is extremely poor. Slips at lock-up. No creep at all. Nissan Ariya Vehicle cannot run in all positions. When shifted to D position, driving is not possible. When shifted to R position, driving is not possible. Judder occurs during lockup. Strange noise in D position. Strange noise in R position. Strange noise in N position. Nissan Ariya Vehicle does not decelerate by engine brake. Maximum speed low. When shifted to P position, Nissan Ariya vehicle does not enter parking condition or, with shifted to another position, parking condition is not cancelled. Nissan Ariya Vehicle runs with CVT in P position. Vehicle runs with CVT in N position. Engine stall. Engine stalls when shifted to N → D or R. Engine speed does not return to idle. Does not shift. Cannot be changed to manual mode. Engine does not start in N or P position. Engine starts in positions other than N or P. Shift position indicator does not change when shifted.
Engine system Work Flow 1 7 2 1 2 8 8 2 2 2 3 3 2 2 8 8 8 2 2 2 2       2 2 2 2        
CAN communication line DTC Index 4 3 3 4 3 3 3 6 6 6 4 4 6 4       6 3 3 3       6 6 4 4 4      
Transmission range switch (P0705–00,P0706–00) 8     8       8 8   5 5 8 3 2 2 2         1 1 1         2 3 3  
Input speed sensor (P0715–00, P0716–00, P0717–00, P0718–00)   4 5     5 5 3 3 3 7 7 3 7 5 5 5 3             3 3   5        
Primary speed sensor (P0791–00, P0792–00, P0793–00, P0794–00)   5 6     6 6 4 4 4 8 8 4 8 6 6 6 4             4 4   6 6      
Secondary speed sensor (P2765–00, P2766–00, P2767–00, P2768–00)   6 7     7 7 10 10   9 9 10 9 7 7 7 5                 3 7 6      
Line Pressure sensor (P0746-00, P0747-00, P0846-00, P084B-00, P0870-00, P0871-00, P0872-00, P0873-00)                                         5                      
CVT fluid temperature sensor (P0711–00, P0712–00, P0713–00) 3     3   9 9 9 9   12 12 9 10 9 9 9                              
Primary pressure sensor (P084C–00, P084D–00)     8     10 10 11 11   10 10 11 11 10 10 10               8              
Secondary pressure sensor (P0841–00, P0847–00, P0848–00)     9     11 11 12 12   11 11 12 12 11 11 11               9              
Torque converter clutch solenoid valve (P0740–00, P0741–00, P0742–00, P0743–00, P0744–00) 6   11 6 6     5 5 5     5         7             5 5            
Electric oil pump (P188E-00, P27A1-00, P27A3-00, P27A4-00, P27A5-00, P27A6-00, P28ED-00, P28EE-00, U0287-00)                     4               6 4 4                      
Manual mode position                                                         1      
Stall test Work Procedure     4     4 4 7 7 7 2 2 7 5 3 3 3               7              
CVT position Inspection and Adjustment 2 2   2 1 2 2       6 6   6 4 4 4         2 3 3       2 3 2 2  
Power supply Diagnosis Procedure           12 12       13 13   13 12 12 12                       5      
Control valve Removal and Installation 9 8 10 9 5 13 13 13 13 8 14 14 13 14 13 13 13 8 4 4 4   4 4 10 7 5 8        
CVT fluid level and state Inspection 5 1 1 5 4 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1   2 2 1 1 1 1        
Ignition switch and starter Wiring Diagram, Work Flow                                                         1 1 1  
Electric shift selecter CONSULT Function           14 14                                                 1

Symptom Table 2

Symptom
Diagnostic item Reference Shift Shock Slips/Will Not Engage Other
Large shock (N→ D position) Large shock (N→ R position) Shock is too large for lock-up. Nissan Ariya Vehicle cannot be started from D position. Vehicle cannot be started from R position. Does not lock-up. Does not hold lock-up condition. Lock-up is not released. When shifted to D position, acceleration is extremely poor. When shifted to R position, acceleration is extremely poor. Slips at lock-up. No creep at all. Nissan Ariya Vehicle cannot run in all positions. When shifted to D position, driving is not possible. When shifted to R position, driving is not possible. Judder occurs during lockup. Strange noise in D position. Strange noise in R position. Strange noise in N position. Maximum speed low. When shifted to P position, Nissan Ariya vehicle does not enter parking condition or, with shifted to another position, parking condition is not cancelled. Nissan Ariya Vehicle runs with CVT in P position. Vehicle runs with CVT in N position. Engine stall. Engine stalls when shifted to N → D or R. Does not shift.
Torque converter Exploded View     1     1 1 1 1 1 1 1 1 1 1 1 1 1 1 1       1 1  
Transmission range switch Exploded View 2 2   3 4 3 3   3 4   6               5            
Oil pump       1 1 2 2 2   2 2 2 2 2 2   2 2 2 2           1
Forward clutch 1     2         2     4 4 4     4     4     2      
Reverse brake   1     2         3   5 5   4     4         3      
Planetary gear                       3 3 3 3   3 3 3 3   2 1      
Bearings                                 5                  
Parking mechanism         3               6 5 5           1 1        
Electric shift selector Removal and Installation 3 3                                                

Shift Position Does Not Change from P Position to Another Position

Diagnosis Procedure

CHECK BATTERY VOLTAGE

Check the battery voltage.

Is the voltage 9 V or more?

YES>>

GO TO 2.

NO>>

Charge the battery. Refer to Work Flow.

CHECK DTC

Check the DTC of the following system.

  • TRANSMISSION (TCM)

  • SHIFT (Electric shift control module)

  • BCM

Is any DTC detected?

YES>>

Check the DTC detected item. Refer to DTC Index (TCM), DTC Index (Electric shift control module), DTC Index (BCM).

NO>>

GO TO 3.

CHECK STOP LAMP SWITCH SIGNAL

With CONSULT

  1. Select “Data Monitor” in “BCM”.

  2. Check the status of “Brake switch 1” and “Brake switch 2”.

    Monitor Item Condition Status
    Brake switch 1 Brake pedal depressed Off
    Brake pedal not depressed On
    Brake switch 2 Brake pedal not depressed Off
    Brake pedal depressed On

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Check the stop lamp switch circuit. Refer to DTC Diagnosis Procedure.

Electric Shift Warning or Cvt System Warning Is Displayed Even Though the Dtc of Electric Shift System and Cvt System Have Not Been Detected

Diagnosis Procedure

CHECK FUNCTION OF DRIVER DOOR SWITCH

Check the function of driver door switch. Refer to Component Function Check.

Is the inspection result normal?

YES>>

Inspection end and Inform customers to handle doors correctly according to the owner's manual. (See Electric Shift Warning or CVT System Warning for the cause of the electric shift warning or CVT system warning displayed on the combination meter.)

NO>>

Check driver door switch circuit. Refer to Diagnosis Procedure.

    Shift (electric Shift Control Module)
    P0604-00 Control Module Ram DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0604* 00 Control module RAM [Intern...
    Cvt: Ge0f14a. Periodic Maintenance. Cvt Fluid
    Cvt Fluid Inspection Check transaxle surrounding area (oil seal and plug etc.) for fluid leakage. If transaxle appears to have oil seepage or a leak, follow the steps below to a...

    Other materials:

    P10c9 Internal Control Module Fuel Injector
    DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P10C9 00 Internal control module fuel injector (Internal control module fuel injector) Diagnosis condition — Signal (terminal) — Threshold ...

    Removal and Installation. Fusible Link Box (12v Sub Battery) (lithium Ion Battery)
    Exploded View 1. Fusible link box cover 2. Fusible link box (12V sub battery) (lithium ion battery) 3. Fusible link box bracket A. Positive cable         Removal and Installation REMOVALDisconnect the 12V battery negative terminal. Refer to Exp ...

    System
    System Description The system switches fluid pressure of each brake to increase, to hold or to decrease according to signals from control unit in ABS actuator and electric unit (control unit). This control system is applied to VDC function, TCS function, ABS function, EBD function, brake ...