Nissan Rogue (T33) 2021-Present Service Manual: Awd Warning Icon/display
Diagnosis Procedure
CHECK POWER SUPPLY AND GROUND CIRCUIT
Perform the trouble diagnosis for power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace the error-detected parts.
PERFORM SELF DIAGNOSIS RESULT (AWD CONTROL UNIT)
CONSULT
Select "Self diagnosis result" mode of “AWD/4WD”.
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 3.
PERFORM SELF DIAGNOSIS RESULT (COMBINATION METER)
CONSULT
Select "Self diagnosis result" mode of "M&A".
Is any DTC detected?
YES>>Check the DTC. Refer to DTC Index (type A meter) or DTC Index (type B meter).
NO>>Perform the trouble diagnosis for combination meter power supply circuit. Refer to Diagnosis Procedure (type A meter) or Diagnosis Procedure (type B meter).
Other materials:
Blind Spot Warning (BSW)
Basic information
WARNING
Failure to follow the warnings and instructions for proper use of the Blind Spot Warning system could result in serious injury or death.
The BSW system is not a substitute for safe driving practices. It cannot prevent collisions with nearby vehicles or objects. Always c ...
U0469 Can Communication
DTC Description
DTC DETECTION LOGIC DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
U0469
00
Invalid data (starter/generator C/U)
(Invalid Data Received From Starter / Generator Control Module)
Diagnosis condition
Ignition switch ON
Signa ...
Forward-facing child restraint installation
using LATCH
Basic information
For proper installation of a forward-facing child restraint in your Nissan Rogue, carefully review all Warnings and Cautions in the “Child safety” and “Child restraints” sections before beginning.
Do not use the lower anchors if the combined weight of the child and res ...