Nissan Rogue (T33) 2021-Present Service Manual: Additional Service When Replacing Distance Sensor

Nissan Rogue (T33) 2021-Present Service Manual / Cruise Control & Driver Assistance :: Driver Assistance System / Driver Assistance System :: Basic Inspection / Additional Service When Replacing Distance Sensor

Work Procedure

  • Always perform the distance sensor configuration after replacing the distance sensor.

  • Always perform the radar alignment after removing and installing or replacing the distance sensor.

    CAUTION:

    The system does not operate normally unless the distance sensor configuration and the radar alignment are performed. Always perform them.

  • Perform the AEB system action test to check that the AEB system operates normally.

DISTANCE SENSOR CONFIGURATION

Perform saving Nissan Ariya vehicle internal information according to "Replace ECU" in CONSULT Operation Manual.

>>

GO TO 2.

PERFORM RADAR ALIGNMENT

Perform the radar alignment. Refer to Work Procedure.

>>

GO TO 3.

AEB SYSTEM ACTION TEST

  1. Perform the following system action test.

    • LDW: Refer to Work Procedure.

    • I-LI: Refer to Work Procedure.

    • BSW: Refer to Work Procedure.

    • I-BSI: Refer to Work Procedure.

    • TSR: Refer to Work Procedure.

    • RCTA: Refer to Work Procedure.

    • I-DA: Refer to Work Procedure.

  2. Check that the each system operates normally.

>>

INSPECTION END

    Diagnosis and Repair Work Flow
    Work Flow Without ProPILOT Assist 2.1OVERALL SEQUENCEDETAILED FLOWINTERVIEW FOR MALFUNCTION It is important to clarify the customer’s concerns before starting the inspection. ...
    Distance Sensor Inspection
    Work Procedure CAUTION: In the following conditions, the distance sensor may not perform optimally. Attaching stickers or installing aftermarket parts around the distance sensor...

    Other materials:

    Dtc/circuit Diagnosis. Lifting Switch
    Component Function Check CHECK FUNCTION CONSULT Ignition switch ON. Select “Lifting switch (Up)” and “Lifting switch (Down)” in “Data monitor” mode of “DRIVER SEAT”. Check lifting switch signal under the following conditions. Monitor item Condition Status ...

    Trip computer
    Basic information The trip computer switches are located on the left side of the steering wheel, allowing easy access while driving the Nissan Rogue. Scroll dial – used to move through menu items and select functions within the vehicle information display; it supports up/down navigation and pu ...

    Symptom Diagnosis. Automatic Back Door Operation Does Not Operate
    All Switches Description Automatic back door open/close function does not operate using all switches. Diagnosis Procedure CHECK OPERATION Fully close the back door manually. Check auto open/close function using automatic back door switch. Is the inspection result normal? YES>& ...