Nissan Rogue (T33) 2021-Present Service Manual: 2wd :: Periodic Maintenance. Rear Wheel Hub and Housing

Nissan Rogue (T33) 2021-Present Service Manual / Transmission & Driveline :: Rear Axle / 2wd :: Periodic Maintenance. Rear Wheel Hub and Housing

Rear Wheel Hub and Housing

Inspection

COMPONENT PART

Make sure that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)

Check the following items, and replace the part if necessary.

  • Move wheel hub and bearing assembly in the axial direction by hand. Check there is no looseness of wheel bearing.

    Axial end play : Refer to Wheel Bearing.

  • Rotate wheel hub and make sure there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub and bearing assembly.

    2wd. Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting
    Noise, Vibration and Harshness (nvh) Troubleshooting NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. Pos...
    2wd. Removal and Installation. Rear Wheel Hub and Housing
    Rear Wheel Hub and Housing Exploded View 1. Axle housing 2. Bushing 3. Hub cap 4. Back plate 5. Hub bolt 6. Wheel hub and bearing assembly 7. Disc rotor — — — — : Nissan...

    Other materials:

    Dtc/circuit Diagnosis. B0073-09 Pre-Ten Rear Lh
    DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis content) DTC Detection Condition B0073-09 PRE-TEN REAR LH (Second Row Left Seat Belt Pretensioner Deployment Control) Diagnosis condition When ignition switch is ON. Signal (terminal) Rear ...

    Parking brake
    Basic information WARNING Never drive the vehicle with the parking brake applied. The brake will overheat and fail to operate and will lead to an accident. Never release the parking brake from outside the vehicle. If the vehicle moves, it will be impossible to push the foot brake pedal and will l ...

    Tcm
    Reference Value CONSULT DATA MONITOR STANDARD VALUE In CONSULT, electric shift timing or lock-up timing, i.e. operation timing of each solenoid valve, is displayed. Therefore, if there is an obvious difference between the shift timing estimated from a shift shock (or engine speed variation ...