Nissan Rogue Service Manual: Removal and installation

Normal operating condition

Description Symptom Result Brake pedal slightly vibrates and operation sound (motor sound and sound from suspension) occurs when VDC function, TCS function, ABS function ...

Wheel sensor

FRONT WHEEL SENSOR FRONT WHEEL SENSOR : Exploded View Front LH wheel sensor Harness connector Slant line FRONT WHEEL SENSOR : Removal and Installation CAUTION:  Be care ...

Other materials:

Diagnosis system (TCM)
DIAGNOSIS DESCRIPTION DIAGNOSIS DESCRIPTION : 1 Trip Detection Diagnosis and 2 Trip Detection Diagnosis NOTE: “Start the engine and turn OFF the ignition switch after warm-up.” This is defined as 1 trip. 1 TRIP DETECTION DIAGNOSIS When initial malfunction is detected, TCM memorizes DTC. ...

Battery
How to Handle Battery CAUTION:  If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.  After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.  Never ...

Camshaft valve clearance
Camshaft valve clearance Perform this inspection as follows after removal, installation, or replacement of the camshaft or any valve parts, or if there are any unusual engine conditions due to changes in valve clearance over time (starting, idling, and/or noise).  Remove the ...