FRONT SENSOR ROTOR
FRONT SENSOR ROTOR : Removal and Installation - Front Sensor Rotor
The front wheel sensor rotor is an integral part of the wheel hub and bearing and cannot be disassembled.
Refer to FAX-9, "Removal and Installation" (FWD) or FAX-40, "Removal and Installation" (AWD).
REAR SENSOR ROTOR
REAR SENSOR ROTOR : Removal and Installation - Rear Sensor Rotor
For FWD vehicles, the rear wheel sensor rotor is an integral part of the wheel hub and bearing and cannot be disassembled. Refer to RAX-7, "Removal and Installation" (FWD).
For AWD vehicles, the rear wheel sensor rotor is pressed on the rear drive shaft and can be disassembled.
Refer to RAX-21, "Disassembly and Assembly" (AWD).
Starting the engine (models without NISSAN
Intelligent Key® system)
Apply the parking brake.
Move the shift lever to P (Park) or N (Neutral).
P (Park) is recommended.
The shift lever cannot be moved out of
P (Park) and into any of the other gear
positions if the ignition key is turned to
the OFF position or if the key is removed
from the ignition ...
Under cover
Exploded View
Floor under cover (RH)
Engine under cover
Floor under cover (LH)
ENGINE UNDER COVER
ENGINE UNDER COVER : Removal and Installation
REMOVAL
Remove engine under cover clips.
Remove engine under cover.
INSTALLATION
Installation is in the reverse ord ...
U0300 CAN communication data
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
U0300
CAN COMM DATA
(Internal Control Module Software Incompatibility)
When the ignition switch is ON, the data length transmitted from
each
con ...