Nissan Rogue (T33) 2021-Present Owner’s Manual & User Guide: Vehicle identification
Vehicle Identification Number (VIN) plate
The vehicle identification number plate is attached as shown. This number identifies your vehicle for registration and records.
Vehicle identification number (chassis number)
The chassis number is located as illustrated.
Engine serial number
The engine serial number is stamped on the engine as shown.
F.M.V.S.S./C.M.V.S.S. certification label
The certification label provides important information such as GVWR, GAWR, VIN, and the manufacturing date. Review it carefully for your Nissan Rogue.
Emission control information label
The emission control information label is attached to the underside of the hood.
Tire and Loading Information label
The cold tire pressure and loading details are shown on the label attached to the pillar.
Air conditioner specification label
The A/C specification label is attached under the hood as shown.
Installing front license plate
To install the front license plate bracket, NISSAN recommends visiting a dealer to ensure proper installation on your Nissan Rogue.
Specifications
Engine
This spark ignition system complies with the Canadian standard ICES-002.
Wheels and tires
Road wheel
Tire
*1: For all season tires
*2: For all terrain tires
Dimensions and weights
...
Vehicle loading information
Basic information
WARNING
Riding in a cargo area is extremely dangerous. In a collision, passengers in such areas are far more likely to be seriously injured or killed.
Do not allow passengers in a ...
Other materials:
System description
COMPONENT PARTS
BODY CONTROL SYSTEM
BODY CONTROL SYSTEM : Component Parts Location
BCM
Behind instrument panel (LH)
POWER CONSUMPTION CONTROL SYSTEM
POWER CONSUMPTION CONTROL SYSTEM : Component Parts Location
Combination meter
Refer to MWI-6, "METER SYSTEM :
Co ...
Ground
Ground Distribution
MAIN HARNESS
ENGINE ROOM HARNESS
ENGINE CONTROL HARNESS
BODY HARNESS
BODY NO. 2 HARNESS
...
Precaution
Precautions for trouble diagnosis
CAUTION:
Never apply 7.0 V or more to the measurement terminal.
Use a tester with open terminal voltage of 7.0 V or less.
Turn the ignition switch OFF and disconnect the battery cable
from the negative terminal when
checking the harne ...
